Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Salle blanche HVAC et équipement de manutention de l'air
Humidificateur ultrasonique
A low-energy adiabatic humidifier that uses piezoelectric transducers to create a fine cool mist for direct-room or short-duct distribution.
- Piezoelectric Fine Mist
- Low Electrical Input
- Cool Adiabatic Output
- Modular Transducer Service
Introduction de produit
Piezoelectric transducers vibrate beneath a controlled shallow water level and break the surface into microscopic droplets. Internal blowers carry the mist from the stainless reservoir through top outlets, where it evaporates into dry air. Because the system does not boil water, electrical demand is low and the evaporation also provides a modest cooling effect.
Key Features
Low power consumption makes the technology suitable for continuous high-duty humidity control.
A stainless reservoir, level control and periodic drain cycle manage the transducer water surface.
Modular transducer plates and accessible blower components can be serviced from the front.
Préoccupations du client produit
Ultrasonic systems need clean feed water, adequate absorption distance and accessible transducers to avoid mineral dust or wetting.
Minerals in atomized mains water settle as white dust.Reverse-osmosis or demineralized feed water limits dissolved solids carried into the air.
Large droplets fall before evaporating and wet nearby surfaces.Correct transducer output and blower airflow produce fine mist within the available absorption volume.
Biofilm forms in stagnant reservoir water.Automatic flushing, controlled refill and accessible stainless tank surfaces support hygienic maintenance.
A failed transducer reduces output across the complete unit.Modular transducer plates allow the affected section to be replaced independently.
Les applications typiques
Cleanrooms électroniquesTextile and printing productionCold storage and produce roomsLaboratory environmental roomsDirect humidification of clean manufacturing spaces
Paramètres techniques
Typical construction and size ranges for an industrial ultrasonic humidifier are shown below.
| Matériaux de base | Stainless water reservoir with piezoelectric ceramic transducer modules |
|---|---|
| Panneau épaisseur | 1.0-1.5 mm stainless and powder-coated cabinet panels |
| Largeur effective | 500-1400 mm cabinet width |
| Longueur maximale | Up to 406 mm overall cabinet depth |
| Acier face épaisseur | 1.0-1.5 mm stainless enclosure sheet |
| Densité Core | Approximately 7500-7800 kg/m³ for piezoelectric ceramic transducer material |
| Conductivité thermique | Approximately 1.2-2.0 W/(m·K) for piezoelectric ceramic |
| surface finie | White-blue powder-coated exterior with smooth stainless wetted tank |
| Type joint | Bolted service cabinet with modular transducer plates, hose outlets and threaded water port |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
3-18 kg/h modular output configurationsDirect-room blower or duct connectionReverse-osmosis water packageHumidity controller, flush cycle and remote monitoring
Planning a Ultrasonic Humidifier specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
