Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de parede e teto para sala limpa
Painel de parede de sala limpa estática-dissipativa
A metal-faced cleanroom wall panel finished with a static-dissipative epoxy coating and integrated into a bonded grounding path, designed to reduce charge accumulation around sensitive electronics and precision processes.
- Static-Dissipative Epoxy Surface
- 10⁷–10⁹ Ohms/Square
- Bonded Grounding Path
- Non-Shedding Honeycomb Core
Introdução do produto
Static-Dissipative Cleanroom Wall Panels combine conductive or dissipative epoxy-coated metal facings with an aluminum honeycomb core and electrically bonded perimeter profiles. The functional surface limits charge accumulation and allows it to move toward designated grounding points. Electrical continuity depends on coatings, metal joints, fasteners and earth connections working as one system. The non-shedding cellular core keeps panel weight low and supports a flat wall face, making this construction suitable for microelectronics, optics and other controlled areas where electrostatic charge can damage sensitive components.
Características-chave
Metal perimeter profiles form defined continuity points between neighboring wall modules.
Grounding lugs connect the panel run to the facility equipotential bonding network.
Aluminum honeycomb supports a flat non-shedding surface at low overall weight.
Accessible test points allow routine resistance and continuity measurements after installation.
Preocupações do produto do cliente
Effective static control requires the correct resistance range, reliable grounding continuity and cleaning that does not insulate the surface.
An antistatic label does not reveal whether charge can actually dissipate to earth.Specified surface resistance, bonded joints and measured grounding continuity define the complete path.
Insulating sealant or paint overspray can interrupt conductivity between panels.Dedicated metal bonding points bypass decorative seals and maintain electrical continuity.
Wax or incompatible cleaner can leave an insulating film on the functional coating.Compatible residue-free cleaning products preserve the measured dissipative surface behavior.
A hidden loose ground connection can leave an entire wall run electrically floating.Visible test terminals allow scheduled point-to-ground verification without dismantling panels.
Aplicações típicas
Semiconductor fabrication cleanroomsElectronics assembly and test roomsPrecision optics laboratoriesBattery and sensor production areasESD-controlled equipment enclosures
Parâmetros técnicos
Typical construction specifications for static-dissipative cleanroom wall panels are listed below.
| Material principal | Non-shedding aluminum honeycomb |
|---|---|
| Painel de espessura | 12.7, 25 or 50 mm |
| Largura efetiva | Up to 1220 mm |
| Comprimento máximo | 4420 mm |
| Aço enfrentando espessura | 0.50–0.80 mm conductive-coated metal facing |
| Densidade Core | Approximately 27 kg/m³ |
| Condutividade térmica | 0.11–0.15 W/(m·K) |
| Superfície acabado | Static-dissipative epoxy, 10⁷–10⁹ Ω/sq. when tested to ASTM D257 |
| Tipo conjunto | Electrically bonded aluminum-framed joint with grounding provision |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
Conductive or static-dissipative resistance rangeGrounding lug locationsSingle- or double-wall systemAlternative honeycomb panel thickness
Planning a Static-Dissipative Cleanroom Wall Panel specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
