English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Стенные и потолочные системы для чистых комнат
Стенная панель для статически рассеивающей чистой комнаты
A metal-faced cleanroom wall panel finished with a static-dissipative epoxy coating and integrated into a bonded grounding path, designed to reduce charge accumulation around sensitive electronics and precision processes.
- Static-Dissipative Epoxy Surface
- 10⁷–10⁹ Ohms/Square
- Bonded Grounding Path
- Non-Shedding Honeycomb Core
Введение продукции
Static-Dissipative Cleanroom Wall Panels combine conductive or dissipative epoxy-coated metal facings with an aluminum honeycomb core and electrically bonded perimeter profiles. The functional surface limits charge accumulation and allows it to move toward designated grounding points. Electrical continuity depends on coatings, metal joints, fasteners and earth connections working as one system. The non-shedding cellular core keeps panel weight low and supports a flat wall face, making this construction suitable for microelectronics, optics and other controlled areas where electrostatic charge can damage sensitive components.
Основные характеристики
Metal perimeter profiles form defined continuity points between neighboring wall modules.
Grounding lugs connect the panel run to the facility equipotential bonding network.
Aluminum honeycomb supports a flat non-shedding surface at low overall weight.
Accessible test points allow routine resistance and continuity measurements after installation.
Обеспокоенность клиентов продуктами
Effective static control requires the correct resistance range, reliable grounding continuity and cleaning that does not insulate the surface.
An antistatic label does not reveal whether charge can actually dissipate to earth.Specified surface resistance, bonded joints and measured grounding continuity define the complete path.
Insulating sealant or paint overspray can interrupt conductivity between panels.Dedicated metal bonding points bypass decorative seals and maintain electrical continuity.
Wax or incompatible cleaner can leave an insulating film on the functional coating.Compatible residue-free cleaning products preserve the measured dissipative surface behavior.
A hidden loose ground connection can leave an entire wall run electrically floating.Visible test terminals allow scheduled point-to-ground verification without dismantling panels.
Типичные приложения
Semiconductor fabrication cleanroomsElectronics assembly and test roomsPrecision optics laboratoriesBattery and sensor production areasESD-controlled equipment enclosures
Технические параметры
Typical construction specifications for static-dissipative cleanroom wall panels are listed below.
| Основной материал | Non-shedding aluminum honeycomb |
|---|---|
| Толщина панели | 12.7, 25 or 50 mm |
| эффективная ширина | Up to 1220 mm |
| Максимальная длина | 4420 mm |
| Толщина линий стали | 0.50–0.80 mm conductive-coated metal facing |
| Плотность ядра | Approximately 27 kg/m³ |
| Теплопроводимость | 0.11–0.15 W/(m·K) |
| Поверхностная отделка | Static-dissipative epoxy, 10⁷–10⁹ Ω/sq. when tested to ASTM D257 |
| Объединенный тип | Electrically bonded aluminum-framed joint with grounding provision |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
Conductive or static-dissipative resistance rangeGrounding lug locationsSingle- or double-wall systemAlternative honeycomb panel thickness
Planning a Static-Dissipative Cleanroom Wall Panel specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
