Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Panel de pared de sala limpia estática-dissipativa
A metal-faced cleanroom wall panel finished with a static-dissipative epoxy coating and integrated into a bonded grounding path, designed to reduce charge accumulation around sensitive electronics and precision processes.
- Static-Dissipative Epoxy Surface
- 10⁷–10⁹ Ohms/Square
- Bonded Grounding Path
- Non-Shedding Honeycomb Core
Introducción del producto
Static-Dissipative Cleanroom Wall Panels combine conductive or dissipative epoxy-coated metal facings with an aluminum honeycomb core and electrically bonded perimeter profiles. The functional surface limits charge accumulation and allows it to move toward designated grounding points. Electrical continuity depends on coatings, metal joints, fasteners and earth connections working as one system. The non-shedding cellular core keeps panel weight low and supports a flat wall face, making this construction suitable for microelectronics, optics and other controlled areas where electrostatic charge can damage sensitive components.
Características clave
Metal perimeter profiles form defined continuity points between neighboring wall modules.
Grounding lugs connect the panel run to the facility equipotential bonding network.
Aluminum honeycomb supports a flat non-shedding surface at low overall weight.
Accessible test points allow routine resistance and continuity measurements after installation.
Preocupaciones del producto del cliente
Effective static control requires the correct resistance range, reliable grounding continuity and cleaning that does not insulate the surface.
An antistatic label does not reveal whether charge can actually dissipate to earth.Specified surface resistance, bonded joints and measured grounding continuity define the complete path.
Insulating sealant or paint overspray can interrupt conductivity between panels.Dedicated metal bonding points bypass decorative seals and maintain electrical continuity.
Wax or incompatible cleaner can leave an insulating film on the functional coating.Compatible residue-free cleaning products preserve the measured dissipative surface behavior.
A hidden loose ground connection can leave an entire wall run electrically floating.Visible test terminals allow scheduled point-to-ground verification without dismantling panels.
Aplicaciones típicas
Semiconductor fabrication cleanroomsElectronics assembly and test roomsPrecision optics laboratoriesBattery and sensor production areasESD-controlled equipment enclosures
Parámetros técnicos
Typical construction specifications for static-dissipative cleanroom wall panels are listed below.
| Materiales Core | Non-shedding aluminum honeycomb |
|---|---|
| Panel de espesor | 12.7, 25 or 50 mm |
| Ancho efectivo | Up to 1220 mm |
| Longitud máxima | 4420 mm |
| Acero frente a espesor | 0.50–0.80 mm conductive-coated metal facing |
| Densidad Core | Approximately 27 kg/m³ |
| Conductividad térmica | 0.11–0.15 W/(m·K) |
| Superficie acabada | Static-dissipative epoxy, 10⁷–10⁹ Ω/sq. when tested to ASTM D257 |
| Tipo conjunto | Electrically bonded aluminum-framed joint with grounding provision |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Conductive or static-dissipative resistance rangeGrounding lug locationsSingle- or double-wall systemAlternative honeycomb panel thickness
Planning a Static-Dissipative Cleanroom Wall Panel specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
