Complete static-dissipative cleanroom wall panel with conductive coating

クリーンルームの壁と天井システム

静的放散クリーンルームの壁パネル

A metal-faced cleanroom wall panel finished with a static-dissipative epoxy coating and integrated into a bonded grounding path, designed to reduce charge accumulation around sensitive electronics and precision processes.

Static-Dissipative Epoxy Surface
10⁷–10⁹ Ohms/Square
Bonded Grounding Path
Non-Shedding Honeycomb Core

見積もりリクエスト製品案内

商品紹介

Static-Dissipative Cleanroom Wall Panels combine conductive or dissipative epoxy-coated metal facings with an aluminum honeycomb core and electrically bonded perimeter profiles. The functional surface limits charge accumulation and allows it to move toward designated grounding points. Electrical continuity depends on coatings, metal joints, fasteners and earth connections working as one system. The non-shedding cellular core keeps panel weight low and supports a flat wall face, making this construction suitable for microelectronics, optics and other controlled areas where electrostatic charge can damage sensitive components.

主要な特徴

Conductive epoxy coating provides a controlled surface-resistance range instead of an ordinary insulating paint layer.

Metal perimeter profiles form defined continuity points between neighboring wall modules.

Grounding lugs connect the panel run to the facility equipotential bonding network.

Aluminum honeycomb supports a flat non-shedding surface at low overall weight.

Accessible test points allow routine resistance and continuity measurements after installation.

お客様の製品に関する懸念事項

Effective static control requires the correct resistance range, reliable grounding continuity and cleaning that does not insulate the surface.

An antistatic label does not reveal whether charge can actually dissipate to earth.Specified surface resistance, bonded joints and measured grounding continuity define the complete path.

Insulating sealant or paint overspray can interrupt conductivity between panels.Dedicated metal bonding points bypass decorative seals and maintain electrical continuity.

Wax or incompatible cleaner can leave an insulating film on the functional coating.Compatible residue-free cleaning products preserve the measured dissipative surface behavior.

A hidden loose ground connection can leave an entire wall run electrically floating.Visible test terminals allow scheduled point-to-ground verification without dismantling panels.

典型的な用途

Semiconductor fabrication cleanroomsElectronics assembly and test roomsPrecision optics laboratoriesBattery and sensor production areasESD-controlled equipment enclosures

技術的なパラメータ

Typical construction specifications for static-dissipative cleanroom wall panels are listed below.

コア材料	Non-shedding aluminum honeycomb
パネルの厚さ	12.7, 25 or 50 mm
有効幅	Up to 1220 mm
最大長さ	4420 mm
鋼鉄の厚さを直面する	0.50–0.80 mm conductive-coated metal facing
コア密度	約 27 kg / m3
熱伝導率	0.11 — 0.15 W / （m · K）
表面仕上げ	Static-dissipative epoxy, 10⁷–10⁹ Ω/sq. when tested to ASTM D257
ジョイントタイプ	Electrically bonded aluminum-framed joint with grounding provision
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Conductive or static-dissipative resistance rangeGrounding lug locationsSingle- or double-wall systemAlternative honeycomb panel thickness

Planning a Static-Dissipative Cleanroom Wall Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する