Complete static-dissipative cleanroom wall panel with conductive coating

Dinding bilik bersih dan sistem siling

Panel Dinding Bilik Bersih Statik-Dissipatif

A metal-faced cleanroom wall panel finished with a static-dissipative epoxy coating and integrated into a bonded grounding path, designed to reduce charge accumulation around sensitive electronics and precision processes.

Static-Dissipative Epoxy Surface
10⁷–10⁹ Ohms/Square
Bonded Grounding Path
Non-Shedding Honeycomb Core

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Static-Dissipative Cleanroom Wall Panels combine conductive or dissipative epoxy-coated metal facings with an aluminum honeycomb core and electrically bonded perimeter profiles. The functional surface limits charge accumulation and allows it to move toward designated grounding points. Electrical continuity depends on coatings, metal joints, fasteners and earth connections working as one system. The non-shedding cellular core keeps panel weight low and supports a flat wall face, making this construction suitable for microelectronics, optics and other controlled areas where electrostatic charge can damage sensitive components.

Ciri-ciri Utama

Conductive epoxy coating provides a controlled surface-resistance range instead of an ordinary insulating paint layer.

Metal perimeter profiles form defined continuity points between neighboring wall modules.

Grounding lugs connect the panel run to the facility equipotential bonding network.

Aluminum honeycomb supports a flat non-shedding surface at low overall weight.

Accessible test points allow routine resistance and continuity measurements after installation.

Kebimbangan Produk Pelanggan

Effective static control requires the correct resistance range, reliable grounding continuity and cleaning that does not insulate the surface.

An antistatic label does not reveal whether charge can actually dissipate to earth.Specified surface resistance, bonded joints and measured grounding continuity define the complete path.

Insulating sealant or paint overspray can interrupt conductivity between panels.Dedicated metal bonding points bypass decorative seals and maintain electrical continuity.

Wax or incompatible cleaner can leave an insulating film on the functional coating.Compatible residue-free cleaning products preserve the measured dissipative surface behavior.

A hidden loose ground connection can leave an entire wall run electrically floating.Visible test terminals allow scheduled point-to-ground verification without dismantling panels.

Permohonan yang biasa

Semiconductor fabrication cleanroomsElectronics assembly and test roomsPrecision optics laboratoriesBattery and sensor production areasESD-controlled equipment enclosures

Parameter teknikal

Typical construction specifications for static-dissipative cleanroom wall panels are listed below.

Bahan Teras	Non-shedding aluminum honeycomb
Ketebalan Panel	12.7, 25 or 50 mm
Lebar berkesan	Up to 1220 mm
Panjang maksimum	4420 mm
Keluli Menghadapi Ketebalan	0.50–0.80 mm conductive-coated metal facing
Ketumpatan teras	Approximately 27 kg/m³
Kekonduksian Terma	0.11–0.15 W/(m·K)
Kemasan permukaan	Static-dissipative epoxy, 10⁷–10⁹ Ω/sq. when tested to ASTM D257
Jenis Bersatu	Electrically bonded aluminum-framed joint with grounding provision
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

Conductive or static-dissipative resistance rangeGrounding lug locationsSingle- or double-wall systemAlternative honeycomb panel thickness

Planning a Static-Dissipative Cleanroom Wall Panel specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami