Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom mur et systèmes de plafond
Panneau mural de salle blanche statique-dissipative
A metal-faced cleanroom wall panel finished with a static-dissipative epoxy coating and integrated into a bonded grounding path, designed to reduce charge accumulation around sensitive electronics and precision processes.
- Static-Dissipative Epoxy Surface
- 10⁷–10⁹ Ohms/Square
- Bonded Grounding Path
- Non-Shedding Honeycomb Core
Introduction de produit
Static-Dissipative Cleanroom Wall Panels combine conductive or dissipative epoxy-coated metal facings with an aluminum honeycomb core and electrically bonded perimeter profiles. The functional surface limits charge accumulation and allows it to move toward designated grounding points. Electrical continuity depends on coatings, metal joints, fasteners and earth connections working as one system. The non-shedding cellular core keeps panel weight low and supports a flat wall face, making this construction suitable for microelectronics, optics and other controlled areas where electrostatic charge can damage sensitive components.
Key Features
Metal perimeter profiles form defined continuity points between neighboring wall modules.
Grounding lugs connect the panel run to the facility equipotential bonding network.
Aluminum honeycomb supports a flat non-shedding surface at low overall weight.
Accessible test points allow routine resistance and continuity measurements after installation.
Préoccupations du client produit
Effective static control requires the correct resistance range, reliable grounding continuity and cleaning that does not insulate the surface.
An antistatic label does not reveal whether charge can actually dissipate to earth.Specified surface resistance, bonded joints and measured grounding continuity define the complete path.
Insulating sealant or paint overspray can interrupt conductivity between panels.Dedicated metal bonding points bypass decorative seals and maintain electrical continuity.
Wax or incompatible cleaner can leave an insulating film on the functional coating.Compatible residue-free cleaning products preserve the measured dissipative surface behavior.
A hidden loose ground connection can leave an entire wall run electrically floating.Visible test terminals allow scheduled point-to-ground verification without dismantling panels.
Les applications typiques
Semiconductor fabrication cleanroomsElectronics assembly and test roomsPrecision optics laboratoriesBattery and sensor production areasESD-controlled equipment enclosures
Paramètres techniques
Typical construction specifications for static-dissipative cleanroom wall panels are listed below.
| Matériaux de base | Non-shedding aluminum honeycomb |
|---|---|
| Panneau épaisseur | 12.7, 25 or 50 mm |
| Largeur effective | Up to 1220 mm |
| Longueur maximale | 4420 mm |
| Acier face épaisseur | 0.50–0.80 mm conductive-coated metal facing |
| Densité Core | Environ 27 kg / m3 |
| Conductivité thermique | 0,11 - 0,15 W / (m · K) |
| surface finie | Static-dissipative epoxy, 10⁷–10⁹ Ω/sq. when tested to ASTM D257 |
| Type joint | Electrically bonded aluminum-framed joint with grounding provision |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
Conductive or static-dissipative resistance rangeGrounding lug locationsSingle- or double-wall systemAlternative honeycomb panel thickness
Planning a Static-Dissipative Cleanroom Wall Panel specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
