Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Janela de observação de sala limpa de aço inoxidável
A fixed hygienic vision panel built around a welded stainless-steel frame and flush safety glazing for wash-down, healthcare and high-containment interiors.
- 304 or 316L Frame
- Welded Hygienic Corners
- Flush Safety Glazing
- Chemical-Resistant Finish
Introdução do produto
This observation window uses a formed and welded stainless-steel architrave rather than painted aluminum. Dressed corner welds, continuous glass seals and concealed attachment create a durable perimeter for rooms exposed to frequent disinfectant wiping or humid cleaning. The frame can receive single, double or specialist glazing and is particularly useful where the window finish must match stainless doors, wall liners or process equipment.
Características-chave
304 suits general clean interiors, while 316L is available for stronger chemical and wash exposure.
A satin finish controls glare and can be restored more readily than a chipped painted coating.
The frame can be fabricated for single, double, lead or fire-rated glazing makeups without exposed screws.
Preocupações do produto do cliente
The window perimeter must tolerate repeated contact with cleaning agents without corroding, opening at mitres or exposing inaccessible fasteners.
Painted frames chip at the glass edge under repeated aggressive cleaning.A solid stainless-steel architrave provides corrosion resistance without relying on a decorative topcoat.
Open corner joints trap moisture and become difficult to inspect.Welded and dressed corners form a continuous metal perimeter.
Mixed frame and equipment finishes create inconsistent cleaning procedures.304 or 316L satin stainless steel coordinates with common hygienic doors and process surfaces.
Aplicações típicas
Biopharmaceutical wash areasHealthcare isolation suitesHigh-containment laboratoriesFood and aseptic processing rooms
Parâmetros técnicos
Typical construction ranges for a stainless-steel cleanroom observation window are listed below.
| Material principal | Tempered or laminated safety glazing in a formed 304 or 316L stainless-steel subframe |
|---|---|
| Painel de espessura | 50–150 mm overall frame depth; 6–12 mm individual glass panes |
| Largura efetiva | 300–1800 mm clear viewing width |
| Comprimento máximo | 3000 mm overall window height |
| Aço enfrentando espessura | 1.0–2.0 mm stainless-steel frame and reveal liners |
| Densidade Core | Approximately 2500 kg/m³ for standard safety glass |
| Condutividade térmica | Approximately 1.0 W/(m·K) for glass; stainless frame is not a thermal break |
| Superfície acabado | Brushed 304 or 316L stainless steel, typically No. 4 or fine satin |
| Tipo conjunto | Welded architrave with concealed subframe, continuous glazing seal and sealed wall perimeter |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
304 or 316L stainless steelSingle or double glazingElectropolished or satin finishIntegral blinds or specialist glass
Planning a Stainless Steel Cleanroom Observation Window specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
