Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Portes de salle blanche, fenêtres et systèmes de verrouillage
fenêtre d'observation de salle blanche en acier inoxydable
A fixed hygienic vision panel built around a welded stainless-steel frame and flush safety glazing for wash-down, healthcare and high-containment interiors.
- 304 or 316L Frame
- Welded Hygienic Corners
- Flush Safety Glazing
- Chemical-Resistant Finish
Introduction de produit
This observation window uses a formed and welded stainless-steel architrave rather than painted aluminum. Dressed corner welds, continuous glass seals and concealed attachment create a durable perimeter for rooms exposed to frequent disinfectant wiping or humid cleaning. The frame can receive single, double or specialist glazing and is particularly useful where the window finish must match stainless doors, wall liners or process equipment.
Key Features
304 suits general clean interiors, while 316L is available for stronger chemical and wash exposure.
A satin finish controls glare and can be restored more readily than a chipped painted coating.
The frame can be fabricated for single, double, lead or fire-rated glazing makeups without exposed screws.
Préoccupations du client produit
The window perimeter must tolerate repeated contact with cleaning agents without corroding, opening at mitres or exposing inaccessible fasteners.
Painted frames chip at the glass edge under repeated aggressive cleaning.A solid stainless-steel architrave provides corrosion resistance without relying on a decorative topcoat.
Open corner joints trap moisture and become difficult to inspect.Welded and dressed corners form a continuous metal perimeter.
Mixed frame and equipment finishes create inconsistent cleaning procedures.304 or 316L satin stainless steel coordinates with common hygienic doors and process surfaces.
Les applications typiques
Biopharmaceutical wash areasHealthcare isolation suitesHigh-containment laboratoriesFood and aseptic processing rooms
Paramètres techniques
Typical construction ranges for a stainless-steel cleanroom observation window are listed below.
| Matériaux de base | Tempered or laminated safety glazing in a formed 304 or 316L stainless-steel subframe |
|---|---|
| Panneau épaisseur | 50–150 mm overall frame depth; 6–12 mm individual glass panes |
| Largeur effective | 300–1800 mm clear viewing width |
| Longueur maximale | 3000 mm overall window height |
| Acier face épaisseur | 1.0–2.0 mm stainless-steel frame and reveal liners |
| Densité Core | Environ 2500 kg / m3 pour le verre de sécurité standard |
| Conductivité thermique | Approximately 1.0 W/(m·K) for glass; stainless frame is not a thermal break |
| surface finie | Brushed 304 or 316L stainless steel, typically No. 4 or fine satin |
| Type joint | Welded architrave with concealed subframe, continuous glazing seal and sealed wall perimeter |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
304 or 316L stainless steelSingle ou double vitrageElectropolished or satin finishIntegral blinds or specialist glass
Planning a Stainless Steel Cleanroom Observation Window specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
