Stainless steel cleanroom observation window with flush glazing

Pintu Bilik Bersih, Windows dan Sistem Interlock

Tetingkap pemerhatian bilik bersih keluli tahan karat

A fixed hygienic vision panel built around a welded stainless-steel frame and flush safety glazing for wash-down, healthcare and high-containment interiors.

304 or 316L Frame
Welded Hygienic Corners
Flush Safety Glazing
Chemical-Resistant Finish

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This observation window uses a formed and welded stainless-steel architrave rather than painted aluminum. Dressed corner welds, continuous glass seals and concealed attachment create a durable perimeter for rooms exposed to frequent disinfectant wiping or humid cleaning. The frame can receive single, double or specialist glazing and is particularly useful where the window finish must match stainless doors, wall liners or process equipment.

Ciri-ciri Utama

Welded stainless corners remove open mitres from the exposed hygienic perimeter.

304 suits general clean interiors, while 316L is available for stronger chemical and wash exposure.

A satin finish controls glare and can be restored more readily than a chipped painted coating.

The frame can be fabricated for single, double, lead or fire-rated glazing makeups without exposed screws.

Kebimbangan Produk Pelanggan

The window perimeter must tolerate repeated contact with cleaning agents without corroding, opening at mitres or exposing inaccessible fasteners.

Painted frames chip at the glass edge under repeated aggressive cleaning.A solid stainless-steel architrave provides corrosion resistance without relying on a decorative topcoat.

Open corner joints trap moisture and become difficult to inspect.Welded and dressed corners form a continuous metal perimeter.

Mixed frame and equipment finishes create inconsistent cleaning procedures.304 or 316L satin stainless steel coordinates with common hygienic doors and process surfaces.

Permohonan yang biasa

Biopharmaceutical wash areasHealthcare isolation suitesHigh-containment laboratoriesFood and aseptic processing rooms

Parameter teknikal

Typical construction ranges for a stainless-steel cleanroom observation window are listed below.

Bahan Teras	Tempered or laminated safety glazing in a formed 304 or 316L stainless-steel subframe
Ketebalan Panel	50–150 mm overall frame depth; 6–12 mm individual glass panes
Lebar berkesan	300–1800 mm clear viewing width
Panjang maksimum	3000 mm overall window height
Keluli Menghadapi Ketebalan	1.0–2.0 mm stainless-steel frame and reveal liners
Ketumpatan teras	Approximately 2500 kg/m³ for standard safety glass
Kekonduksian Terma	Approximately 1.0 W/(m·K) for glass; stainless frame is not a thermal break
Kemasan permukaan	Brushed 304 or 316L stainless steel, typically No. 4 or fine satin
Jenis Bersatu	Welded architrave with concealed subframe, continuous glazing seal and sealed wall perimeter
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

304 or 316L stainless steelSingle or double glazingElectropolished or satin finishIntegral blinds or specialist glass

Planning a Stainless Steel Cleanroom Observation Window specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami