Stainless steel cleanroom observation window with flush glazing

클린룸 도어, 창문 및 인터락 시스템

스테인레스 스틸 클린룸 관찰 창

A fixed hygienic vision panel built around a welded stainless-steel frame and flush safety glazing for wash-down, healthcare and high-containment interiors.

304 or 316L Frame
Welded Hygienic Corners
Flush Safety Glazing
Chemical-Resistant Finish

견적 요청 제품 찾아보기

상품 소개

This observation window uses a formed and welded stainless-steel architrave rather than painted aluminum. Dressed corner welds, continuous glass seals and concealed attachment create a durable perimeter for rooms exposed to frequent disinfectant wiping or humid cleaning. The frame can receive single, double or specialist glazing and is particularly useful where the window finish must match stainless doors, wall liners or process equipment.

주요 기능

Welded stainless corners remove open mitres from the exposed hygienic perimeter.

304 suits general clean interiors, while 316L is available for stronger chemical and wash exposure.

A satin finish controls glare and can be restored more readily than a chipped painted coating.

The frame can be fabricated for single, double, lead or fire-rated glazing makeups without exposed screws.

고객 제품 관심사

The window perimeter must tolerate repeated contact with cleaning agents without corroding, opening at mitres or exposing inaccessible fasteners.

Painted frames chip at the glass edge under repeated aggressive cleaning.A solid stainless-steel architrave provides corrosion resistance without relying on a decorative topcoat.

Open corner joints trap moisture and become difficult to inspect.Welded and dressed corners form a continuous metal perimeter.

Mixed frame and equipment finishes create inconsistent cleaning procedures.304 or 316L satin stainless steel coordinates with common hygienic doors and process surfaces.

일반적인 응용 프로그램

Biopharmaceutical wash areasHealthcare isolation suitesHigh-containment laboratoriesFood and aseptic processing rooms

기술 매개변수

Typical construction ranges for a stainless-steel cleanroom observation window are listed below.

핵심 재료	Tempered or laminated safety glazing in a formed 304 or 316L stainless-steel subframe
패널 두께	50–150 mm overall frame depth; 6–12 mm individual glass panes
유효 폭	300–1800 mm clear viewing width
최대 길이	3000 mm overall window height
강철 면면 두께	1.0–2.0 mm stainless-steel frame and reveal liners
코어 밀도	표준 안전 유리의 경우 약 2500 kg / m 3
열전도도 (Thermal Conductivity)	Approximately 1.0 W/(m·K) for glass; stainless frame is not a thermal break
표면 마무리	Brushed 304 or 316L stainless steel, typically No. 4 or fine satin
접합 유형	Welded architrave with concealed subframe, continuous glazing seal and sealed wall perimeter
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

304 or 316L stainless steel단일 또는 이중 유리Electropolished or satin finishIntegral blinds or specialist glass

Planning a Stainless Steel Cleanroom Observation Window specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.