English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Двери в чистых помещениях, окна и системы блокировки
Окно нержавеющей стали чистой комнаты наблюдения
A fixed hygienic vision panel built around a welded stainless-steel frame and flush safety glazing for wash-down, healthcare and high-containment interiors.
- 304 or 316L Frame
- Welded Hygienic Corners
- Flush Safety Glazing
- Chemical-Resistant Finish
Введение продукции
This observation window uses a formed and welded stainless-steel architrave rather than painted aluminum. Dressed corner welds, continuous glass seals and concealed attachment create a durable perimeter for rooms exposed to frequent disinfectant wiping or humid cleaning. The frame can receive single, double or specialist glazing and is particularly useful where the window finish must match stainless doors, wall liners or process equipment.
Основные характеристики
304 suits general clean interiors, while 316L is available for stronger chemical and wash exposure.
A satin finish controls glare and can be restored more readily than a chipped painted coating.
The frame can be fabricated for single, double, lead or fire-rated glazing makeups without exposed screws.
Обеспокоенность клиентов продуктами
The window perimeter must tolerate repeated contact with cleaning agents without corroding, opening at mitres or exposing inaccessible fasteners.
Painted frames chip at the glass edge under repeated aggressive cleaning.A solid stainless-steel architrave provides corrosion resistance without relying on a decorative topcoat.
Open corner joints trap moisture and become difficult to inspect.Welded and dressed corners form a continuous metal perimeter.
Mixed frame and equipment finishes create inconsistent cleaning procedures.304 or 316L satin stainless steel coordinates with common hygienic doors and process surfaces.
Типичные приложения
Biopharmaceutical wash areasHealthcare isolation suitesHigh-containment laboratoriesFood and aseptic processing rooms
Технические параметры
Typical construction ranges for a stainless-steel cleanroom observation window are listed below.
| Основной материал | Tempered or laminated safety glazing in a formed 304 or 316L stainless-steel subframe |
|---|---|
| Толщина панели | 50–150 mm overall frame depth; 6–12 mm individual glass panes |
| эффективная ширина | 300–1800 mm clear viewing width |
| Максимальная длина | 3000 mm overall window height |
| Толщина линий стали | 1.0–2.0 mm stainless-steel frame and reveal liners |
| Плотность ядра | Approximately 2500 kg/m³ for standard safety glass |
| Теплопроводимость | Approximately 1.0 W/(m·K) for glass; stainless frame is not a thermal break |
| Поверхностная отделка | Brushed 304 or 316L stainless steel, typically No. 4 or fine satin |
| Объединенный тип | Welded architrave with concealed subframe, continuous glazing seal and sealed wall perimeter |
| Customization | Доступно в зависимости от предполагаемого приложения и операционной среды |
Доступные варианты
304 or 316L stainless steelSingle or double glazingElectropolished or satin finishIntegral blinds or specialist glass
Planning a Stainless Steel Cleanroom Observation Window specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
