Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Limpeza, desinfecção e esterilização da sala limpa
Z Sapatos Sole Tacky Roller
Walk-over shoe-sole tacky roller station that presents a continuously refreshed adhesive film for capturing footwear particles at controlled-area entrances.
- Walk-over particle capture at entry points
- Enclosed take-up protects used adhesive
- Replaceable continuous tacky-film cartridge
Introdução do produto
The Shoe Sole Tacky Roller is a low-profile stainless station with a supported adhesive film across the walking surface. Each pass presses shoe soles against the tacky layer to collect dry dust and fibers; an indexed roller mechanism advances used film into the enclosed housing and exposes a fresh section. A stable non-slip frame and shallow step height support routine personnel flow without loose peel-off sheets around the entrance.
Características-chave
Indexed film advance maintains a usable tack surface.
Used film winds into a closed compartment.
Low step height supports natural walking movement.
Stainless outer housing is easy to wipe down.
Cartridge design simplifies consumable replacement.
Preocupações do produto do cliente
The station addresses inconsistent sticky-mat replacement, exposed loaded sheets, variable footwear contact and entrance congestion.
Overused adhesive surfacesIndexed advance exposes fresh tack at defined intervals.
Contaminated sheet disposalLoaded film winds into an enclosed take-up roll.
Incomplete sole contactThe supported broad surface allows a normal step across the adhesive zone.
Dificuldade de saneamentoBrushed stainless exterior panels tolerate routine wipe-down.
Aplicações típicas
Cleanroom gowning-room entrancesPersonnel airlocksElectronics assembly access pointsPharmaceutical support corridorsControlled packaging areas
Parâmetros técnicos
The following values describe compact automatic adhesive-film sole cleaners for gowning rooms, airlocks and controlled production entries.
| Material principal | Low-density polyethylene adhesive film on polymer roller cores |
|---|---|
| Painel de espessura | 2.0 mm stainless top-panel thickness |
| Largura efetiva | 500-700 mm walking width |
| Comprimento máximo | 1200 mm overall station length |
| Aço enfrentando espessura | 1.5-2.0 mm Type 304 stainless enclosure thickness |
| Densidade Core | 920 kg/m³ nominal polyethylene film density |
| Condutividade térmica | 0.33 W/(m·K) nominal for polyethylene film |
| Superfície acabado | Brushed stainless housing with blue pressure-sensitive film |
| Tipo conjunto | Indexed supply-and-take-up roller cartridge within hinged enclosure |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Manual pedal or automatic indexed advance500, 600 or 700 mm walking widthBlue, white or transparent tacky filmFreestanding or recessed installationEntry counter and film-use indicator
Planning a Shoe Sole Tacky Roller specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
