Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Nettoyage, désinfection et stérilisation de la salle blanche
Chaussure Sole Tacky Roller
Walk-over shoe-sole tacky roller station that presents a continuously refreshed adhesive film for capturing footwear particles at controlled-area entrances.
- Walk-over particle capture at entry points
- Enclosed take-up protects used adhesive
- Replaceable continuous tacky-film cartridge
Introduction de produit
The Shoe Sole Tacky Roller is a low-profile stainless station with a supported adhesive film across the walking surface. Each pass presses shoe soles against the tacky layer to collect dry dust and fibers; an indexed roller mechanism advances used film into the enclosed housing and exposes a fresh section. A stable non-slip frame and shallow step height support routine personnel flow without loose peel-off sheets around the entrance.
Key Features
Indexed film advance maintains a usable tack surface.
Used film winds into a closed compartment.
Low step height supports natural walking movement.
Stainless outer housing is easy to wipe down.
Cartridge design simplifies consumable replacement.
Préoccupations du client produit
The station addresses inconsistent sticky-mat replacement, exposed loaded sheets, variable footwear contact and entrance congestion.
Overused adhesive surfacesIndexed advance exposes fresh tack at defined intervals.
Contaminated sheet disposalLoaded film winds into an enclosed take-up roll.
Incomplete sole contactThe supported broad surface allows a normal step across the adhesive zone.
Sanitation difficileBrushed stainless exterior panels tolerate routine wipe-down.
Les applications typiques
Cleanroom gowning-room entrancesZ
Airlocks du personnelElectronics assembly access pointsPharmaceutical support corridorsControlled packaging areas
Paramètres techniques
The following values describe compact automatic adhesive-film sole cleaners for gowning rooms, airlocks and controlled production entries.
| Matériaux de base | Low-density polyethylene adhesive film on polymer roller cores |
|---|---|
| Panneau épaisseur | 2.0 mm stainless top-panel thickness |
| Largeur effective | 500-700 mm walking width |
| Longueur maximale | 1200 mm overall station length |
| Acier face épaisseur | 1.5-2.0 mm Type 304 stainless enclosure thickness |
| Densité Core | 920 kg/m³ nominal polyethylene film density |
| Conductivité thermique | 0.33 W/(m·K) nominal for polyethylene film |
| surface finie | Brushed stainless housing with blue pressure-sensitive film |
| Type joint | Indexed supply-and-take-up roller cartridge within hinged enclosure |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Manual pedal or automatic indexed advance500, 600 or 700 mm walking widthBlue, white or transparent tacky filmFreestanding or recessed installationEntry counter and film-use indicator
Planning a Shoe Sole Tacky Roller specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
