Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Limpieza de sala limpia, desinfección y esterilización
Zapatos Tacky Roller
Walk-over shoe-sole tacky roller station that presents a continuously refreshed adhesive film for capturing footwear particles at controlled-area entrances.
- Walk-over particle capture at entry points
- Enclosed take-up protects used adhesive
- Replaceable continuous tacky-film cartridge
Introducción del producto
The Shoe Sole Tacky Roller is a low-profile stainless station with a supported adhesive film across the walking surface. Each pass presses shoe soles against the tacky layer to collect dry dust and fibers; an indexed roller mechanism advances used film into the enclosed housing and exposes a fresh section. A stable non-slip frame and shallow step height support routine personnel flow without loose peel-off sheets around the entrance.
Características clave
Indexed film advance maintains a usable tack surface.
Used film winds into a closed compartment.
Low step height supports natural walking movement.
Stainless outer housing is easy to wipe down.
Cartridge design simplifies consumable replacement.
Preocupaciones del producto del cliente
The station addresses inconsistent sticky-mat replacement, exposed loaded sheets, variable footwear contact and entrance congestion.
Overused adhesive surfacesIndexed advance exposes fresh tack at defined intervals.
Contaminated sheet disposalLoaded film winds into an enclosed take-up roll.
Incomplete sole contactThe supported broad surface allows a normal step across the adhesive zone.
Difícil saneamientoBrushed stainless exterior panels tolerate routine wipe-down.
Aplicaciones típicas
Cleanroom gowning-room entrancesAirlocks para personalElectronics assembly access pointsPharmaceutical support corridorsControlled packaging areas
Parámetros técnicos
The following values describe compact automatic adhesive-film sole cleaners for gowning rooms, airlocks and controlled production entries.
| Materiales Core | Low-density polyethylene adhesive film on polymer roller cores |
|---|---|
| Panel de espesor | 2.0 mm stainless top-panel thickness |
| Ancho efectivo | 500-700 mm walking width |
| Longitud máxima | 1200 mm overall station length |
| Acero frente a espesor | 1.5-2.0 mm Type 304 stainless enclosure thickness |
| Densidad Core | 920 kg/m³ nominal polyethylene film density |
| Conductividad térmica | 0.33 W/(m·K) nominal for polyethylene film |
| Superficie acabada | Brushed stainless housing with blue pressure-sensitive film |
| Tipo conjunto | Indexed supply-and-take-up roller cartridge within hinged enclosure |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Manual pedal or automatic indexed advance500, 600 or 700 mm walking widthBlue, white or transparent tacky filmFreestanding or recessed installationEntry counter and film-use indicator
Planning a Shoe Sole Tacky Roller specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
