Complete shoe sole tacky roller station in three-quarter view

クリーンルームの清掃 · 消毒 · 滅菌

靴 sole タッキーローラー

Walk-over shoe-sole tacky roller station that presents a continuously refreshed adhesive film for capturing footwear particles at controlled-area entrances.

Walk-over particle capture at entry points
Enclosed take-up protects used adhesive
Replaceable continuous tacky-film cartridge

見積もりリクエスト製品案内

商品紹介

The Shoe Sole Tacky Roller is a low-profile stainless station with a supported adhesive film across the walking surface. Each pass presses shoe soles against the tacky layer to collect dry dust and fibers; an indexed roller mechanism advances used film into the enclosed housing and exposes a fresh section. A stable non-slip frame and shallow step height support routine personnel flow without loose peel-off sheets around the entrance.

主要な特徴

Broad adhesive contact zone captures foot-borne particulate.

Indexed film advance maintains a usable tack surface.

Used film winds into a closed compartment.

Low step height supports natural walking movement.

Stainless outer housing is easy to wipe down.

Cartridge design simplifies consumable replacement.

お客様の製品に関する懸念事項

The station addresses inconsistent sticky-mat replacement, exposed loaded sheets, variable footwear contact and entrance congestion.

Overused adhesive surfacesIndexed advance exposes fresh tack at defined intervals.

Contaminated sheet disposalLoaded film winds into an enclosed take-up roll.

Incomplete sole contactThe supported broad surface allows a normal step across the adhesive zone.

衛生困難Brushed stainless exterior panels tolerate routine wipe-down.

典型的な用途

Cleanroom gowning-room entrancesパーソナルエアロックElectronics assembly access pointsPharmaceutical support corridorsControlled packaging areas

技術的なパラメータ

The following values describe compact automatic adhesive-film sole cleaners for gowning rooms, airlocks and controlled production entries.

コア材料	Low-density polyethylene adhesive film on polymer roller cores
パネルの厚さ	2.0 mm stainless top-panel thickness
有効幅	500-700 mm walking width
最大長さ	1200 mm overall station length
鋼鉄の厚さを直面する	1.5-2.0 mm Type 304 stainless enclosure thickness
コア密度	920 kg/m³ nominal polyethylene film density
熱伝導率	0.33 W/(m·K) nominal for polyethylene film
表面仕上げ	Brushed stainless housing with blue pressure-sensitive film
ジョイントタイプ	Indexed supply-and-take-up roller cartridge within hinged enclosure
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Manual pedal or automatic indexed advance500, 600 or 700 mm walking widthBlue, white or transparent tacky filmFreestanding or recessed installationEntry counter and film-use indicator

Planning a Shoe Sole Tacky Roller specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する