Complete shoe sole tacky roller station in three-quarter view

Pembersihan bilik bersih, pembasmian kuman dan pensterilan

Roller Tacky Tunggal Kasut

Walk-over shoe-sole tacky roller station that presents a continuously refreshed adhesive film for capturing footwear particles at controlled-area entrances.

Walk-over particle capture at entry points
Enclosed take-up protects used adhesive
Replaceable continuous tacky-film cartridge

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The Shoe Sole Tacky Roller is a low-profile stainless station with a supported adhesive film across the walking surface. Each pass presses shoe soles against the tacky layer to collect dry dust and fibers; an indexed roller mechanism advances used film into the enclosed housing and exposes a fresh section. A stable non-slip frame and shallow step height support routine personnel flow without loose peel-off sheets around the entrance.

Ciri-ciri Utama

Broad adhesive contact zone captures foot-borne particulate.

Indexed film advance maintains a usable tack surface.

Used film winds into a closed compartment.

Low step height supports natural walking movement.

Stainless outer housing is easy to wipe down.

Cartridge design simplifies consumable replacement.

Kebimbangan Produk Pelanggan

The station addresses inconsistent sticky-mat replacement, exposed loaded sheets, variable footwear contact and entrance congestion.

Overused adhesive surfacesIndexed advance exposes fresh tack at defined intervals.

Contaminated sheet disposalLoaded film winds into an enclosed take-up roll.

Incomplete sole contactThe supported broad surface allows a normal step across the adhesive zone.

Sanitasi yang sukarBrushed stainless exterior panels tolerate routine wipe-down.

Permohonan yang biasa

Cleanroom gowning-room entrancesPersonnel airlocksElectronics assembly access pointsPharmaceutical support corridorsControlled packaging areas

Parameter teknikal

The following values describe compact automatic adhesive-film sole cleaners for gowning rooms, airlocks and controlled production entries.

Bahan Teras	Low-density polyethylene adhesive film on polymer roller cores
Ketebalan Panel	2.0 mm stainless top-panel thickness
Lebar berkesan	500-700 mm walking width
Panjang maksimum	1200 mm overall station length
Keluli Menghadapi Ketebalan	1.5-2.0 mm Type 304 stainless enclosure thickness
Ketumpatan teras	920 kg/m³ nominal polyethylene film density
Kekonduksian Terma	0.33 W/(m·K) nominal for polyethylene film
Kemasan permukaan	Brushed stainless housing with blue pressure-sensitive film
Jenis Bersatu	Indexed supply-and-take-up roller cartridge within hinged enclosure
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Manual pedal or automatic indexed advance500, 600 or 700 mm walking widthBlue, white or transparent tacky filmFreestanding or recessed installationEntry counter and film-use indicator

Planning a Shoe Sole Tacky Roller specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami