Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Portas de sala limpa, janelas e sistemas de bloqueio
Porta de sala limpa FRP
A fully molded fiberglass-reinforced plastic door leaf that encapsulates a closed-cell PIR core, eliminating exposed face seams in wet and chemical-cleaning environments.
- Seamless Molded FRP Skin
- Closed-Cell PIR Core
- Low-Moisture-Uptake Insulation
- Chemical-Resistant Hygienic Surface
Introdução do produto
The Seamless FRP Cleanroom Door is produced in a closed mold so the glass-fiber-reinforced polyester wraps continuously around the leaf faces and edges. A high-density closed-cell PIR insulation layer supports the shell, and embedded aluminum reinforcement accepts hinges, locks and protective hardware. Because there are no folded metal seams on the exposed leaf, the surface is well suited to repeated washdown and cleaning chemistry that can attack painted edges.
Características-chave
FRP does not develop red rust when the surface is scratched.
Closed-cell PIR limits internal moisture uptake and keeps the leaf dimensionally stable.
Embedded reinforcement provides secure anchorage for hardware without exposed plates.
Smooth gel-coat can be repaired locally if deep impact damage occurs.
Preocupações do produto do cliente
FRP doors are selected when moisture and chemicals expose the weaknesses of folded metal skins, porous cores and coating-dependent corrosion protection.
Cleaning liquid penetrates folded seams and damages the internal door core.A continuously molded FRP shell encapsulates the core across faces and edges.
Scratched steel requires prompt coating repair to prevent rust.Fiberglass composite remains non-ferrous through the full skin thickness.
Moisture-sensitive cores can swell and distort door alignment.The low-water-uptake closed-cell PIR core is fully encapsulated by the molded FRP shell.
Surface-mounted reinforcement introduces difficult cleaning edges.Aluminum hardware blocks are molded inside the leaf at factory-defined fixing zones.
Aplicações típicas
Biotechnology washdown roomsPharmaceutical wet-process areasFood manufacturing hygiene zonesBattery production clean spacesCorrosive laboratory environments
Parâmetros técnicos
Typical values for a seamless molded FRP cleanroom door leaf are shown below.
| Material principal | High-density closed-cell polyisocyanurate (PIR) foam |
|---|---|
| Painel de espessura | 40 or 44 mm molded door leaf |
| Largura efetiva | 700-1200 mm standard single-leaf range |
| Comprimento máximo | 2400 mm standard molded leaf height |
| Aço enfrentando espessura | 0 mm steel; seamless molded fiberglass-reinforced polyester skin |
| Densidade Core | 40-45 kg/m³ high-density PIR |
| Condutividade térmica | 0.022-0.026 W/(m·K) typical PIR core range |
| Superfície acabado | Smooth pigmented FRP gel-coat with sealed molded edges |
| Tipo conjunto | Seamless leaf closing against neoprene-gasketed aluminum or stainless steel frame |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
Stainless steel or aluminum frameFlush glazed vision panelFactory-fitted kick protectionManual or automatic swing operation
Planning a Seamless FRP Cleanroom Door specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
