English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
سلس FRP باب غرف الأبحاث
A fully molded fiberglass-reinforced plastic door leaf that encapsulates a closed-cell PIR core, eliminating exposed face seams in wet and chemical-cleaning environments.
- Seamless Molded FRP Skin
- Closed-Cell PIR Core
- Low-Moisture-Uptake Insulation
- Chemical-Resistant Hygienic Surface
مقدمة المنتج
The Seamless FRP Cleanroom Door is produced in a closed mold so the glass-fiber-reinforced polyester wraps continuously around the leaf faces and edges. A high-density closed-cell PIR insulation layer supports the shell, and embedded aluminum reinforcement accepts hinges, locks and protective hardware. Because there are no folded metal seams on the exposed leaf, the surface is well suited to repeated washdown and cleaning chemistry that can attack painted edges.
الخصائص الرئيسية
FRP does not develop red rust when the surface is scratched.
Closed-cell PIR limits internal moisture uptake and keeps the leaf dimensionally stable.
Embedded reinforcement provides secure anchorage for hardware without exposed plates.
Smooth gel-coat can be repaired locally if deep impact damage occurs.
مخاوف المنتج للعملاء
FRP doors are selected when moisture and chemicals expose the weaknesses of folded metal skins, porous cores and coating-dependent corrosion protection.
Cleaning liquid penetrates folded seams and damages the internal door core.A continuously molded FRP shell encapsulates the core across faces and edges.
Scratched steel requires prompt coating repair to prevent rust.Fiberglass composite remains non-ferrous through the full skin thickness.
Moisture-sensitive cores can swell and distort door alignment.The low-water-uptake closed-cell PIR core is fully encapsulated by the molded FRP shell.
Surface-mounted reinforcement introduces difficult cleaning edges.Aluminum hardware blocks are molded inside the leaf at factory-defined fixing zones.
تطبيقات نموذجية
Biotechnology washdown roomsPharmaceutical wet-process areasFood manufacturing hygiene zonesBattery production clean spacesCorrosive laboratory environments
المعلمات الفنية
Typical values for a seamless molded FRP cleanroom door leaf are shown below.
| المواد الأساسية | High-density closed-cell polyisocyanurate (PIR) foam |
|---|---|
| سمك اللوحة | 40 or 44 mm molded door leaf |
| العرض الفعال | 700-1200 mm standard single-leaf range |
| الحد الأقصى الطول | 2400 mm standard molded leaf height |
| الصلب يواجه سمك | 0 mm steel; seamless molded fiberglass-reinforced polyester skin |
| الكثافة الأساسية | 40-45 kg/m³ high-density PIR |
| الموصلية الحرارية | 0.022-0.026 W/(m·K) typical PIR core range |
| إنهاء السطح | Smooth pigmented FRP gel-coat with sealed molded edges |
| نوع المشترك | Seamless leaf closing against neoprene-gasketed aluminum or stainless steel frame |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Stainless steel or aluminum frameFlush glazed vision panelFactory-fitted kick protectionManual or automatic swing operation
Planning a Seamless FRP Cleanroom Door specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
