Complete seamless FRP cleanroom door in a hygienic metal frame

클린룸 도어, 창문 및 인터락 시스템

원활한 FRP 클린룸 문

A fully molded fiberglass-reinforced plastic door leaf that encapsulates a closed-cell PIR core, eliminating exposed face seams in wet and chemical-cleaning environments.

Seamless Molded FRP Skin
Closed-Cell PIR Core
Low-Moisture-Uptake Insulation
Chemical-Resistant Hygienic Surface

견적 요청 제품 찾아보기

상품 소개

The Seamless FRP Cleanroom Door is produced in a closed mold so the glass-fiber-reinforced polyester wraps continuously around the leaf faces and edges. A high-density closed-cell PIR insulation layer supports the shell, and embedded aluminum reinforcement accepts hinges, locks and protective hardware. Because there are no folded metal seams on the exposed leaf, the surface is well suited to repeated washdown and cleaning chemistry that can attack painted edges.

주요 기능

One-piece molded skin removes face-to-edge seams where liquid can enter.

FRP does not develop red rust when the surface is scratched.

Closed-cell PIR limits internal moisture uptake and keeps the leaf dimensionally stable.

Embedded reinforcement provides secure anchorage for hardware without exposed plates.

Smooth gel-coat can be repaired locally if deep impact damage occurs.

고객 제품 관심사

FRP doors are selected when moisture and chemicals expose the weaknesses of folded metal skins, porous cores and coating-dependent corrosion protection.

Cleaning liquid penetrates folded seams and damages the internal door core.A continuously molded FRP shell encapsulates the core across faces and edges.

Scratched steel requires prompt coating repair to prevent rust.Fiberglass composite remains non-ferrous through the full skin thickness.

Moisture-sensitive cores can swell and distort door alignment.The low-water-uptake closed-cell PIR core is fully encapsulated by the molded FRP shell.

Surface-mounted reinforcement introduces difficult cleaning edges.Aluminum hardware blocks are molded inside the leaf at factory-defined fixing zones.

일반적인 응용 프로그램

Biotechnology washdown roomsPharmaceutical wet-process areasFood manufacturing hygiene zonesBattery production clean spacesCorrosive laboratory environments

기술 매개변수

Typical values for a seamless molded FRP cleanroom door leaf are shown below.

핵심 재료	High-density closed-cell polyisocyanurate (PIR) foam
패널 두께	40 or 44 mm molded door leaf
유효 폭	700-1200 mm standard single-leaf range
최대 길이	2400 mm standard molded leaf height
강철 면면 두께	0 mm steel; seamless molded fiberglass-reinforced polyester skin
코어 밀도	40-45 kg/m³ high-density PIR
열전도도 (Thermal Conductivity)	0.022-0.026 W/(m·K) typical PIR core range
표면 마무리	Smooth pigmented FRP gel-coat with sealed molded edges
접합 유형	Seamless leaf closing against neoprene-gasketed aluminum or stainless steel frame
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Stainless steel or aluminum frameFlush glazed vision panelFactory-fitted kick protectionManual or automatic swing operation

Planning a Seamless FRP Cleanroom Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.