Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Puertas de sala limpia, ventanas y sistemas de bloqueo
Puerta de sala limpia FRP por
A fully molded fiberglass-reinforced plastic door leaf that encapsulates a closed-cell PIR core, eliminating exposed face seams in wet and chemical-cleaning environments.
- Seamless Molded FRP Skin
- Closed-Cell PIR Core
- Low-Moisture-Uptake Insulation
- Chemical-Resistant Hygienic Surface
Introducción del producto
The Seamless FRP Cleanroom Door is produced in a closed mold so the glass-fiber-reinforced polyester wraps continuously around the leaf faces and edges. A high-density closed-cell PIR insulation layer supports the shell, and embedded aluminum reinforcement accepts hinges, locks and protective hardware. Because there are no folded metal seams on the exposed leaf, the surface is well suited to repeated washdown and cleaning chemistry that can attack painted edges.
Características clave
FRP does not develop red rust when the surface is scratched.
Closed-cell PIR limits internal moisture uptake and keeps the leaf dimensionally stable.
Embedded reinforcement provides secure anchorage for hardware without exposed plates.
Smooth gel-coat can be repaired locally if deep impact damage occurs.
Preocupaciones del producto del cliente
FRP doors are selected when moisture and chemicals expose the weaknesses of folded metal skins, porous cores and coating-dependent corrosion protection.
Cleaning liquid penetrates folded seams and damages the internal door core.A continuously molded FRP shell encapsulates the core across faces and edges.
Scratched steel requires prompt coating repair to prevent rust.Fiberglass composite remains non-ferrous through the full skin thickness.
Moisture-sensitive cores can swell and distort door alignment.The low-water-uptake closed-cell PIR core is fully encapsulated by the molded FRP shell.
Surface-mounted reinforcement introduces difficult cleaning edges.Aluminum hardware blocks are molded inside the leaf at factory-defined fixing zones.
Aplicaciones típicas
Biotechnology washdown roomsPharmaceutical wet-process areasFood manufacturing hygiene zonesBattery production clean spacesCorrosive laboratory environments
Parámetros técnicos
Typical values for a seamless molded FRP cleanroom door leaf are shown below.
| Materiales Core | High-density closed-cell polyisocyanurate (PIR) foam |
|---|---|
| Panel de espesor | 40 or 44 mm molded door leaf |
| Ancho efectivo | 700-1200 mm standard single-leaf range |
| Longitud máxima | 2400 mm standard molded leaf height |
| Acero frente a espesor | 0 mm steel; seamless molded fiberglass-reinforced polyester skin |
| Densidad Core | 40-45 kg/m³ high-density PIR |
| Conductividad térmica | 0.022-0.026 W/(m·K) typical PIR core range |
| Superficie acabada | Smooth pigmented FRP gel-coat with sealed molded edges |
| Tipo conjunto | Seamless leaf closing against neoprene-gasketed aluminum or stainless steel frame |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Stainless steel or aluminum frameFlush glazed vision panelFactory-fitted kick protectionManual or automatic swing operation
Planning a Seamless FRP Cleanroom Door specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
