Complete seamless FRP cleanroom door in a hygienic metal frame

Temiz Oda Kapıları, Pencereler ve Kilitleme Sistemleri

FRP Temiz Oda Kapısı

A fully molded fiberglass-reinforced plastic door leaf that encapsulates a closed-cell PIR core, eliminating exposed face seams in wet and chemical-cleaning environments.

Seamless Molded FRP Skin
Closed-Cell PIR Core
Low-Moisture-Uptake Insulation
Chemical-Resistant Hygienic Surface

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The Seamless FRP Cleanroom Door is produced in a closed mold so the glass-fiber-reinforced polyester wraps continuously around the leaf faces and edges. A high-density closed-cell PIR insulation layer supports the shell, and embedded aluminum reinforcement accepts hinges, locks and protective hardware. Because there are no folded metal seams on the exposed leaf, the surface is well suited to repeated washdown and cleaning chemistry that can attack painted edges.

Ana Özellikler

One-piece molded skin removes face-to-edge seams where liquid can enter.

FRP does not develop red rust when the surface is scratched.

Closed-cell PIR limits internal moisture uptake and keeps the leaf dimensionally stable.

Embedded reinforcement provides secure anchorage for hardware without exposed plates.

Smooth gel-coat can be repaired locally if deep impact damage occurs.

Müşteri Ürün Sorunları

FRP doors are selected when moisture and chemicals expose the weaknesses of folded metal skins, porous cores and coating-dependent corrosion protection.

Cleaning liquid penetrates folded seams and damages the internal door core.A continuously molded FRP shell encapsulates the core across faces and edges.

Scratched steel requires prompt coating repair to prevent rust.Fiberglass composite remains non-ferrous through the full skin thickness.

Moisture-sensitive cores can swell and distort door alignment.The low-water-uptake closed-cell PIR core is fully encapsulated by the molded FRP shell.

Surface-mounted reinforcement introduces difficult cleaning edges.Aluminum hardware blocks are molded inside the leaf at factory-defined fixing zones.

Tipik uygulamalar

Biotechnology washdown roomsPharmaceutical wet-process areasFood manufacturing hygiene zonesBattery production clean spacesCorrosive laboratory environments

Teknik parametreler

Typical values for a seamless molded FRP cleanroom door leaf are shown below.

Temel malzemeler	High-density closed-cell polyisocyanurate (PIR) foam
Panel kalınlığı	40 or 44 mm molded door leaf
Effective Width (Etkili Genişlik)	700-1200 mm standard single-leaf range
Maksimum uzunluk	2400 mm standard molded leaf height
Çelik yüz yüze kalınlığı	0 mm steel; seamless molded fiberglass-reinforced polyester skin
Core Density (Çekirdek Yoğunluğu)	40-45 kg/m³ high-density PIR
Termal İletkenlik	0.022-0.026 W/(m·K) typical PIR core range
Yüzey bitirme	Smooth pigmented FRP gel-coat with sealed molded edges
Ortak tip	Seamless leaf closing against neoprene-gasketed aluminum or stainless steel frame
Customization (Özelleşme)	Kullanılan amaçlanan uygulama ve çalışma ortamına göre kullanılabilir

Mevcut Seçenekler

Stainless steel or aluminum frameFlush glazed vision panelFactory-fitted kick protectionManual or automatic swing operation

Planning a Seamless FRP Cleanroom Door specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun