Complete seamless FRP cleanroom door in a hygienic metal frame

Двери в чистых помещениях, окна и системы блокировки

Бесшивная дверь чистой комнаты FRP

A fully molded fiberglass-reinforced plastic door leaf that encapsulates a closed-cell PIR core, eliminating exposed face seams in wet and chemical-cleaning environments.

Seamless Molded FRP Skin
Closed-Cell PIR Core
Low-Moisture-Uptake Insulation
Chemical-Resistant Hygienic Surface

Запрос котировки Просмотреть продукты

Введение продукции

The Seamless FRP Cleanroom Door is produced in a closed mold so the glass-fiber-reinforced polyester wraps continuously around the leaf faces and edges. A high-density closed-cell PIR insulation layer supports the shell, and embedded aluminum reinforcement accepts hinges, locks and protective hardware. Because there are no folded metal seams on the exposed leaf, the surface is well suited to repeated washdown and cleaning chemistry that can attack painted edges.

Основные характеристики

One-piece molded skin removes face-to-edge seams where liquid can enter.

FRP does not develop red rust when the surface is scratched.

Closed-cell PIR limits internal moisture uptake and keeps the leaf dimensionally stable.

Embedded reinforcement provides secure anchorage for hardware without exposed plates.

Smooth gel-coat can be repaired locally if deep impact damage occurs.

Обеспокоенность клиентов продуктами

FRP doors are selected when moisture and chemicals expose the weaknesses of folded metal skins, porous cores and coating-dependent corrosion protection.

Cleaning liquid penetrates folded seams and damages the internal door core.A continuously molded FRP shell encapsulates the core across faces and edges.

Scratched steel requires prompt coating repair to prevent rust.Fiberglass composite remains non-ferrous through the full skin thickness.

Moisture-sensitive cores can swell and distort door alignment.The low-water-uptake closed-cell PIR core is fully encapsulated by the molded FRP shell.

Surface-mounted reinforcement introduces difficult cleaning edges.Aluminum hardware blocks are molded inside the leaf at factory-defined fixing zones.

Типичные приложения

Biotechnology washdown roomsPharmaceutical wet-process areasFood manufacturing hygiene zonesBattery production clean spacesCorrosive laboratory environments

Технические параметры

Typical values for a seamless molded FRP cleanroom door leaf are shown below.

Основной материал	High-density closed-cell polyisocyanurate (PIR) foam
Толщина панели	40 or 44 mm molded door leaf
эффективная ширина	700-1200 mm standard single-leaf range
Максимальная длина	2400 mm standard molded leaf height
Толщина линий стали	0 mm steel; seamless molded fiberglass-reinforced polyester skin
Плотность ядра	40-45 kg/m³ high-density PIR
Теплопроводимость	0.022-0.026 W/(m·K) typical PIR core range
Поверхностная отделка	Smooth pigmented FRP gel-coat with sealed molded edges
Объединенный тип	Seamless leaf closing against neoprene-gasketed aluminum or stainless steel frame
Customization	Доступно в зависимости от предполагаемого приложения и операционной среды

Доступные варианты

Stainless steel or aluminum frameFlush glazed vision panelFactory-fitted kick protectionManual or automatic swing operation

Planning a Seamless FRP Cleanroom Door specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой