Complete seamless FRP cleanroom door in a hygienic metal frame

Pintu Cleanroom, Jendela dan Sistem Interlock

Pintu Cleanroom FRP yang mulus

A fully molded fiberglass-reinforced plastic door leaf that encapsulates a closed-cell PIR core, eliminating exposed face seams in wet and chemical-cleaning environments.

Seamless Molded FRP Skin
Closed-Cell PIR Core
Low-Moisture-Uptake Insulation
Chemical-Resistant Hygienic Surface

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Seamless FRP Cleanroom Door is produced in a closed mold so the glass-fiber-reinforced polyester wraps continuously around the leaf faces and edges. A high-density closed-cell PIR insulation layer supports the shell, and embedded aluminum reinforcement accepts hinges, locks and protective hardware. Because there are no folded metal seams on the exposed leaf, the surface is well suited to repeated washdown and cleaning chemistry that can attack painted edges.

Fitur utama:

One-piece molded skin removes face-to-edge seams where liquid can enter.

FRP does not develop red rust when the surface is scratched.

Closed-cell PIR limits internal moisture uptake and keeps the leaf dimensionally stable.

Embedded reinforcement provides secure anchorage for hardware without exposed plates.

Smooth gel-coat can be repaired locally if deep impact damage occurs.

Kekhawatiran produk pelanggan

FRP doors are selected when moisture and chemicals expose the weaknesses of folded metal skins, porous cores and coating-dependent corrosion protection.

Cleaning liquid penetrates folded seams and damages the internal door core.A continuously molded FRP shell encapsulates the core across faces and edges.

Scratched steel requires prompt coating repair to prevent rust.Fiberglass composite remains non-ferrous through the full skin thickness.

Moisture-sensitive cores can swell and distort door alignment.The low-water-uptake closed-cell PIR core is fully encapsulated by the molded FRP shell.

Surface-mounted reinforcement introduces difficult cleaning edges.Aluminum hardware blocks are molded inside the leaf at factory-defined fixing zones.

Aplikasi yang Tipis

Biotechnology washdown roomsPharmaceutical wet-process areasFood manufacturing hygiene zonesBattery production clean spacesCorrosive laboratory environments

Parameter teknis

Typical values for a seamless molded FRP cleanroom door leaf are shown below.

Bahan inti	High-density closed-cell polyisocyanurate (PIR) foam
Ketebalan Panel (Panel Thickness)	40 or 44 mm molded door leaf
Efektif lebar	700-1200 mm standard single-leaf range
Panjang maksimum	2400 mm standard molded leaf height
Baja menghadap ketebalan	0 mm steel; seamless molded fiberglass-reinforced polyester skin
Kepadatan inti (core density)	40-45 kg/m³ high-density PIR
Konduktivitas Termal (Thermal Conductivity)	0.022-0.026 W/(m·K) typical PIR core range
Permukaan selesai	Smooth pigmented FRP gel-coat with sealed molded edges
Jenis Bersama	Seamless leaf closing against neoprene-gasketed aluminum or stainless steel frame
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

Stainless steel or aluminum frameFlush glazed vision panelFactory-fitted kick protectionManual or automatic swing operation

Planning a Seamless FRP Cleanroom Door specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami