Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamentos de drenagem, higiene e segurança da sala limpa
Z Monitor de deficiência de oxigênio
A fixed oxygen monitor that warns occupants and ventilation controls when inert gas displaces breathable air.
- Continuous Oxygen Display
- Low-Oxygen Alarm Stages
- Local Beacon and Sounder
- Ventilation Relay Output
Introdução do produto
The oxygen deficiency monitor continuously measures ambient oxygen with a replaceable electrochemical or optical sensor and presents the value on a local display. Configurable low-level alarms operate relays, beacon and sounder outputs before conditions become severe. Remote heads can be positioned at the breathing zone or according to the release scenario while the display remains visible outside the room.
Características-chave
Two alarm stages support ventilation and evacuation actions.
Sensor and system faults are separated from gas alarms.
Remote outputs integrate with ventilation and access-control logic.
Preocupações do produto do cliente
Inert gases are odorless and can displace oxygen without visible warning, especially in enclosed utility spaces.
Personnel cannot sense oxygen depletion directly.A fixed sensor continuously measures and displays oxygen concentration.
A single high alarm provides little time for corrective action.Staged low alarms can start ventilation before evacuation level.
Sensor end-of-life can mimic a safe reading.Fault monitoring and scheduled replacement maintain measurement integrity.
The safest display location may differ from the sensing point.Remote-sensor configurations separate the room sensor from the entrance display.
Aplicações típicas
Nitrogen utility roomsCryogenic storage areasInert-gas process suitesLaboratory gas storage
Parâmetros técnicos
Typical monitor construction is listed below; sensor placement and alarm setpoints follow the inert-gas risk assessment.
| Material principal | Powder-coated steel or polymer enclosure with oxygen sensor electronics |
|---|---|
| Painel de espessura | 1.0-1.5 mm metal enclosure |
| Largura efetiva | 150-300 mm |
| Comprimento máximo | Up to 450 mm enclosure height |
| Aço enfrentando espessura | 1.0-1.5 mm steel enclosure panels |
| Densidade Core | 7850 kg/m³ for steel enclosure parts |
| Condutividade térmica | 45-60 W/(m·K) for steel enclosure components |
| Superfície acabado | Smooth light-gray coating with high-visibility alarm indicators |
| Tipo conjunto | Gasketed enclosure with pluggable sensor, relay and power terminals |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Integral or remote sensorDual alarm relaysBeacon and sounderAnalog or network output
Planning a Oxygen Deficiency Monitor specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
