Complete oxygen deficiency monitor and sensor in three-quarter view

Peralatan Saliran Bilik Bersih, Kebersihan dan Keselamatan

Monitor Kekurangan Oksigen

A fixed oxygen monitor that warns occupants and ventilation controls when inert gas displaces breathable air.

Continuous Oxygen Display
Low-Oxygen Alarm Stages
Local Beacon and Sounder
Ventilation Relay Output

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The oxygen deficiency monitor continuously measures ambient oxygen with a replaceable electrochemical or optical sensor and presents the value on a local display. Configurable low-level alarms operate relays, beacon and sounder outputs before conditions become severe. Remote heads can be positioned at the breathing zone or according to the release scenario while the display remains visible outside the room.

Ciri-ciri Utama

Continuous oxygen indication gives personnel an immediate room-status check.

Two alarm stages support ventilation and evacuation actions.

Sensor and system faults are separated from gas alarms.

Remote outputs integrate with ventilation and access-control logic.

Kebimbangan Produk Pelanggan

Inert gases are odorless and can displace oxygen without visible warning, especially in enclosed utility spaces.

Personnel cannot sense oxygen depletion directly.A fixed sensor continuously measures and displays oxygen concentration.

A single high alarm provides little time for corrective action.Staged low alarms can start ventilation before evacuation level.

Sensor end-of-life can mimic a safe reading.Fault monitoring and scheduled replacement maintain measurement integrity.

The safest display location may differ from the sensing point.Remote-sensor configurations separate the room sensor from the entrance display.

Permohonan yang biasa

Nitrogen utility roomsCryogenic storage areasInert-gas process suitesLaboratory gas storage

Parameter teknikal

Typical monitor construction is listed below; sensor placement and alarm setpoints follow the inert-gas risk assessment.

Bahan Teras	Powder-coated steel or polymer enclosure with oxygen sensor electronics
Ketebalan Panel	1.0-1.5 mm metal enclosure
Lebar berkesan	150-300 mm
Panjang maksimum	Up to 450 mm enclosure height
Keluli Menghadapi Ketebalan	1.0-1.5 mm steel enclosure panels
Ketumpatan teras	7850 kg/m³ for steel enclosure parts
Kekonduksian Terma	45-60 W/(m·K) for steel enclosure components
Kemasan permukaan	Smooth light-gray coating with high-visibility alarm indicators
Jenis Bersatu	Gasketed enclosure with pluggable sensor, relay and power terminals
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Integral or remote sensorDual alarm relaysBeacon and sounderAnalog or network output

Planning a Oxygen Deficiency Monitor specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami