Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Drenaje de sala limpia, equipos de higiene y seguridad
Z Monitor de deficiencia de oxígeno
A fixed oxygen monitor that warns occupants and ventilation controls when inert gas displaces breathable air.
- Continuous Oxygen Display
- Low-Oxygen Alarm Stages
- Local Beacon and Sounder
- Ventilation Relay Output
Introducción del producto
The oxygen deficiency monitor continuously measures ambient oxygen with a replaceable electrochemical or optical sensor and presents the value on a local display. Configurable low-level alarms operate relays, beacon and sounder outputs before conditions become severe. Remote heads can be positioned at the breathing zone or according to the release scenario while the display remains visible outside the room.
Características clave
Two alarm stages support ventilation and evacuation actions.
Sensor and system faults are separated from gas alarms.
Remote outputs integrate with ventilation and access-control logic.
Preocupaciones del producto del cliente
Inert gases are odorless and can displace oxygen without visible warning, especially in enclosed utility spaces.
Personnel cannot sense oxygen depletion directly.A fixed sensor continuously measures and displays oxygen concentration.
A single high alarm provides little time for corrective action.Staged low alarms can start ventilation before evacuation level.
Sensor end-of-life can mimic a safe reading.Fault monitoring and scheduled replacement maintain measurement integrity.
The safest display location may differ from the sensing point.Remote-sensor configurations separate the room sensor from the entrance display.
Aplicaciones típicas
Nitrogen utility roomsCryogenic storage areasInert-gas process suitesLaboratory gas storage
Parámetros técnicos
Typical monitor construction is listed below; sensor placement and alarm setpoints follow the inert-gas risk assessment.
| Materiales Core | Powder-coated steel or polymer enclosure with oxygen sensor electronics |
|---|---|
| Panel de espesor | 1.0-1.5 mm metal enclosure |
| Ancho efectivo | 150-300 mm |
| Longitud máxima | Up to 450 mm enclosure height |
| Acero frente a espesor | 1.0-1.5 mm steel enclosure panels |
| Densidad Core | 7850 kg/m³ for steel enclosure parts |
| Conductividad térmica | 45-60 W/(m·K) for steel enclosure components |
| Superficie acabada | Smooth light-gray coating with high-visibility alarm indicators |
| Tipo conjunto | Gasketed enclosure with pluggable sensor, relay and power terminals |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Integral or remote sensorDual alarm relaysBeacon and sounderAnalog or network output
Planning a Oxygen Deficiency Monitor specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
