English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Дренажное оборудование, оборудование для гигиены и безопасности в чистых помещениях
Монитор кислородной недостаточности
A fixed oxygen monitor that warns occupants and ventilation controls when inert gas displaces breathable air.
- Continuous Oxygen Display
- Low-Oxygen Alarm Stages
- Local Beacon and Sounder
- Ventilation Relay Output
Введение продукции
The oxygen deficiency monitor continuously measures ambient oxygen with a replaceable electrochemical or optical sensor and presents the value on a local display. Configurable low-level alarms operate relays, beacon and sounder outputs before conditions become severe. Remote heads can be positioned at the breathing zone or according to the release scenario while the display remains visible outside the room.
Основные характеристики
Two alarm stages support ventilation and evacuation actions.
Sensor and system faults are separated from gas alarms.
Remote outputs integrate with ventilation and access-control logic.
Обеспокоенность клиентов продуктами
Inert gases are odorless and can displace oxygen without visible warning, especially in enclosed utility spaces.
Personnel cannot sense oxygen depletion directly.A fixed sensor continuously measures and displays oxygen concentration.
A single high alarm provides little time for corrective action.Staged low alarms can start ventilation before evacuation level.
Sensor end-of-life can mimic a safe reading.Fault monitoring and scheduled replacement maintain measurement integrity.
The safest display location may differ from the sensing point.Remote-sensor configurations separate the room sensor from the entrance display.
Типичные приложения
Nitrogen utility roomsCryogenic storage areasInert-gas process suitesLaboratory gas storage
Технические параметры
Typical monitor construction is listed below; sensor placement and alarm setpoints follow the inert-gas risk assessment.
| Основной материал | Powder-coated steel or polymer enclosure with oxygen sensor electronics |
|---|---|
| Толщина панели | 1.0-1.5 mm metal enclosure |
| эффективная ширина | 150-300 mm |
| Максимальная длина | Up to 450 mm enclosure height |
| Толщина линий стали | 1.0-1.5 mm steel enclosure panels |
| Плотность ядра | 7850 kg/m³ for steel enclosure parts |
| Теплопроводимость | 45-60 W/(m·K) for steel enclosure components |
| Поверхностная отделка | Smooth light-gray coating with high-visibility alarm indicators |
| Объединенный тип | Gasketed enclosure with pluggable sensor, relay and power terminals |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Integral or remote sensorDual alarm relaysBeacon and sounderAnalog or network output
Planning a Oxygen Deficiency Monitor specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
