Complete oxygen deficiency monitor and sensor in three-quarter view

クリーンルーム排水 · 衛生 · 安全設備

酸素欠乏モニター

A fixed oxygen monitor that warns occupants and ventilation controls when inert gas displaces breathable air.

Continuous Oxygen Display
Low-Oxygen Alarm Stages
Local Beacon and Sounder
Ventilation Relay Output

商品紹介

The oxygen deficiency monitor continuously measures ambient oxygen with a replaceable electrochemical or optical sensor and presents the value on a local display. Configurable low-level alarms operate relays, beacon and sounder outputs before conditions become severe. Remote heads can be positioned at the breathing zone or according to the release scenario while the display remains visible outside the room.

主要な特徴

Continuous oxygen indication gives personnel an immediate room-status check.

Two alarm stages support ventilation and evacuation actions.

Sensor and system faults are separated from gas alarms.

Remote outputs integrate with ventilation and access-control logic.

お客様の製品に関する懸念事項

Inert gases are odorless and can displace oxygen without visible warning, especially in enclosed utility spaces.

Personnel cannot sense oxygen depletion directly.A fixed sensor continuously measures and displays oxygen concentration.

A single high alarm provides little time for corrective action.Staged low alarms can start ventilation before evacuation level.

Sensor end-of-life can mimic a safe reading.Fault monitoring and scheduled replacement maintain measurement integrity.

The safest display location may differ from the sensing point.Remote-sensor configurations separate the room sensor from the entrance display.

典型的な用途

Nitrogen utility roomsCryogenic storage areasInert-gas process suitesLaboratory gas storage

技術的なパラメータ

Typical monitor construction is listed below; sensor placement and alarm setpoints follow the inert-gas risk assessment.

コア材料	Powder-coated steel or polymer enclosure with oxygen sensor electronics
パネルの厚さ	1.0-1.5 mm metal enclosure
有効幅	150-300 mm
最大長さ	Up to 450 mm enclosure height
鋼鉄の厚さを直面する	1.0-1.5 mm steel enclosure panels
コア密度	7850 kg/m³ for steel enclosure parts
熱伝導率	45-60 W/(m·K) for steel enclosure components
表面仕上げ	Smooth light-gray coating with high-visibility alarm indicators
ジョイントタイプ	Gasketed enclosure with pluggable sensor, relay and power terminals
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Integral or remote sensorDual alarm relaysBeacon and sounderAnalog or network output

Planning a Oxygen Deficiency Monitor specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する