Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Acessórios de instalação de sala limpa
Sealante de silicone neutro
A non-corrosive neutral-cure silicone for elastic sealing around cleanroom glazing, coated-metal frames and non-porous perimeter joints.
- Neutral Non-Corrosive Cure
- Glazing-Compatible Adhesion
- UV and Ozone Resistance
- Flexible Temperature Service
Introdução do produto
Neutral silicone sealant cures through atmospheric moisture without releasing the acidic by-products associated with acetoxy silicone. The formulation is suited to glass, anodized aluminum, coated steel and many common frame materials used around cleanroom windows and doors. After cure, the silicone rubber retains flexibility across temperature cycling and resists UV and ozone exposure at perimeter interfaces.
Características-chave
Low-modulus silicone movement accommodates glazing and frame perimeter expansion.
Cured silicone maintains flexibility through wide routine temperature variation.
Resistance to ultraviolet light, ozone and moisture supports exposed perimeter joints.
Preocupações do produto do cliente
Sensitive frame and glazing assemblies need an elastic seal that cures without attacking adjacent metals or coatings.
Acidic cure by-products can discolor or corrode susceptible metal interfaces.Neutral moisture curing avoids acetic-acid release and is selected for compatible glazing and frame substrates.
Glass and aluminum expand at different rates and tear rigid perimeter fillers.Low-modulus silicone sustains repeated movement while maintaining a continuous seal.
Sunlight and ozone embrittle unsuitable organic sealants at exterior frames.The silicone network provides durable resistance to UV radiation, ozone and weather exposure.
Contaminated joint flanks cause localized adhesion loss.Defined cleaning, masking and primer selection produce consistent two-sided adhesion.
Aplicações típicas
Cleanroom observation-window perimetersAluminum door-frame jointsGlass-to-metal glazing sealsCoated-panel perimeter jointsInterior and exterior frame weather seals
Parâmetros técnicos
Typical construction and application ranges for a one-part neutral-cure silicone glazing sealant are shown below.
| Material principal | One-component alkoxy neutral-cure silicone elastomer |
|---|---|
| Painel de espessura | 3-15 mm recommended cured seal depth |
| Largura efetiva | 6-25 mm typical glazing or perimeter joint width |
| Comprimento máximo | Up to 10000 mm continuous prepared perimeter section |
| Aço enfrentando espessura | 0.50-1.50 mm compatible coated-steel frame or panel facing |
| Densidade Core | Approximately 1300-1550 kg/m³ uncured sealant density |
| Condutividade térmica | Approximately 0.20-0.30 W/(m·K) for cured silicone rubber |
| Superfície acabado | Smooth tooled silicone surface in translucent, white, gray or black |
| Tipo conjunto | Two-sided glazing, butt or perimeter joint over non-adhering backing material |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Translucent, white, gray or blackLow-modulus weatherseal gradeCompatible glazing primer300 mL cartridge or 600 mL foil pack
Planning a Neutral Silicone Sealant specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
