Three-quarter view of a neutral silicone sealant cartridge and translucent nozzle

Аксессуары для установки в чистых помещениях

Нейтральный силиконовый уплотнитель

A non-corrosive neutral-cure silicone for elastic sealing around cleanroom glazing, coated-metal frames and non-porous perimeter joints.

Neutral Non-Corrosive Cure
Glazing-Compatible Adhesion
UV and Ozone Resistance
Flexible Temperature Service

Запрос котировки Просмотреть продукты

Введение продукции

Neutral silicone sealant cures through atmospheric moisture without releasing the acidic by-products associated with acetoxy silicone. The formulation is suited to glass, anodized aluminum, coated steel and many common frame materials used around cleanroom windows and doors. After cure, the silicone rubber retains flexibility across temperature cycling and resists UV and ozone exposure at perimeter interfaces.

Основные характеристики

Neutral curing reduces corrosion risk on compatible metals and avoids the sharp odor of acetoxy systems.

Low-modulus silicone movement accommodates glazing and frame perimeter expansion.

Cured silicone maintains flexibility through wide routine temperature variation.

Resistance to ultraviolet light, ozone and moisture supports exposed perimeter joints.

Обеспокоенность клиентов продуктами

Sensitive frame and glazing assemblies need an elastic seal that cures without attacking adjacent metals or coatings.

Acidic cure by-products can discolor or corrode susceptible metal interfaces.Neutral moisture curing avoids acetic-acid release and is selected for compatible glazing and frame substrates.

Glass and aluminum expand at different rates and tear rigid perimeter fillers.Low-modulus silicone sustains repeated movement while maintaining a continuous seal.

Sunlight and ozone embrittle unsuitable organic sealants at exterior frames.The silicone network provides durable resistance to UV radiation, ozone and weather exposure.

Contaminated joint flanks cause localized adhesion loss.Defined cleaning, masking and primer selection produce consistent two-sided adhesion.

Типичные приложения

Cleanroom observation-window perimetersAluminum door-frame jointsGlass-to-metal glazing sealsCoated-panel perimeter jointsInterior and exterior frame weather seals

Технические параметры

Typical construction and application ranges for a one-part neutral-cure silicone glazing sealant are shown below.

Основной материал	One-component alkoxy neutral-cure silicone elastomer
Толщина панели	3-15 mm recommended cured seal depth
эффективная ширина	6-25 mm typical glazing or perimeter joint width
Максимальная длина	Up to 10000 mm continuous prepared perimeter section
Толщина линий стали	0.50-1.50 mm compatible coated-steel frame or panel facing
Плотность ядра	Approximately 1300-1550 kg/m³ uncured sealant density
Теплопроводимость	Approximately 0.20-0.30 W/(m·K) for cured silicone rubber
Поверхностная отделка	Smooth tooled silicone surface in translucent, white, gray or black
Объединенный тип	Two-sided glazing, butt or perimeter joint over non-adhering backing material
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Translucent, white, gray or blackLow-modulus weatherseal gradeCompatible glazing primer300 mL cartridge or 600 mL foil pack

Planning a Neutral Silicone Sealant specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой