Three-quarter view of a neutral silicone sealant cartridge and translucent nozzle

クリーンルームの設置付属品

Neutral シリコーンシーラント

A non-corrosive neutral-cure silicone for elastic sealing around cleanroom glazing, coated-metal frames and non-porous perimeter joints.

Neutral Non-Corrosive Cure
Glazing-Compatible Adhesion
UV and Ozone Resistance
Flexible Temperature Service

見積もりリクエスト製品案内

商品紹介

Neutral silicone sealant cures through atmospheric moisture without releasing the acidic by-products associated with acetoxy silicone. The formulation is suited to glass, anodized aluminum, coated steel and many common frame materials used around cleanroom windows and doors. After cure, the silicone rubber retains flexibility across temperature cycling and resists UV and ozone exposure at perimeter interfaces.

主要な特徴

Neutral curing reduces corrosion risk on compatible metals and avoids the sharp odor of acetoxy systems.

Low-modulus silicone movement accommodates glazing and frame perimeter expansion.

Cured silicone maintains flexibility through wide routine temperature variation.

Resistance to ultraviolet light, ozone and moisture supports exposed perimeter joints.

お客様の製品に関する懸念事項

Sensitive frame and glazing assemblies need an elastic seal that cures without attacking adjacent metals or coatings.

Acidic cure by-products can discolor or corrode susceptible metal interfaces.Neutral moisture curing avoids acetic-acid release and is selected for compatible glazing and frame substrates.

Glass and aluminum expand at different rates and tear rigid perimeter fillers.Low-modulus silicone sustains repeated movement while maintaining a continuous seal.

Sunlight and ozone embrittle unsuitable organic sealants at exterior frames.The silicone network provides durable resistance to UV radiation, ozone and weather exposure.

Contaminated joint flanks cause localized adhesion loss.Defined cleaning, masking and primer selection produce consistent two-sided adhesion.

典型的な用途

Cleanroom observation-window perimetersAluminum door-frame jointsGlass-to-metal glazing sealsCoated-panel perimeter jointsInterior and exterior frame weather seals

技術的なパラメータ

Typical construction and application ranges for a one-part neutral-cure silicone glazing sealant are shown below.

コア材料	One-component alkoxy neutral-cure silicone elastomer
パネルの厚さ	3-15 mm recommended cured seal depth
有効幅	6-25 mm typical glazing or perimeter joint width
最大長さ	Up to 10000 mm continuous prepared perimeter section
鋼鉄の厚さを直面する	0.50-1.50 mm compatible coated-steel frame or panel facing
コア密度	Approximately 1300-1550 kg/m³ uncured sealant density
熱伝導率	Approximately 0.20-0.30 W/(m·K) for cured silicone rubber
表面仕上げ	Smooth tooled silicone surface in translucent, white, gray or black
ジョイントタイプ	Two-sided glazing, butt or perimeter joint over non-adhering backing material
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Translucent, white, gray or blackLow-modulus weatherseal gradeCompatible glazing primer300 mL cartridge or 600 mL foil pack

Planning a Neutral Silicone Sealant specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する