İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Kurulum Aksesuarları
Nötr silikon sealant
A non-corrosive neutral-cure silicone for elastic sealing around cleanroom glazing, coated-metal frames and non-porous perimeter joints.
- Neutral Non-Corrosive Cure
- Glazing-Compatible Adhesion
- UV and Ozone Resistance
- Flexible Temperature Service
Ürün tanıtımı
Neutral silicone sealant cures through atmospheric moisture without releasing the acidic by-products associated with acetoxy silicone. The formulation is suited to glass, anodized aluminum, coated steel and many common frame materials used around cleanroom windows and doors. After cure, the silicone rubber retains flexibility across temperature cycling and resists UV and ozone exposure at perimeter interfaces.
Ana Özellikler
Low-modulus silicone movement accommodates glazing and frame perimeter expansion.
Cured silicone maintains flexibility through wide routine temperature variation.
Resistance to ultraviolet light, ozone and moisture supports exposed perimeter joints.
Müşteri Ürün Sorunları
Sensitive frame and glazing assemblies need an elastic seal that cures without attacking adjacent metals or coatings.
Acidic cure by-products can discolor or corrode susceptible metal interfaces.Neutral moisture curing avoids acetic-acid release and is selected for compatible glazing and frame substrates.
Glass and aluminum expand at different rates and tear rigid perimeter fillers.Low-modulus silicone sustains repeated movement while maintaining a continuous seal.
Sunlight and ozone embrittle unsuitable organic sealants at exterior frames.The silicone network provides durable resistance to UV radiation, ozone and weather exposure.
Contaminated joint flanks cause localized adhesion loss.Defined cleaning, masking and primer selection produce consistent two-sided adhesion.
Tipik uygulamalar
Cleanroom observation-window perimetersAluminum door-frame jointsGlass-to-metal glazing sealsCoated-panel perimeter jointsInterior and exterior frame weather seals
Teknik parametreler
Typical construction and application ranges for a one-part neutral-cure silicone glazing sealant are shown below.
| Temel malzemeler | One-component alkoxy neutral-cure silicone elastomer |
|---|---|
| Panel kalınlığı | 3-15 mm recommended cured seal depth |
| Effective Width (Etkili Genişlik) | 6-25 mm typical glazing or perimeter joint width |
| Maksimum uzunluk | Up to 10000 mm continuous prepared perimeter section |
| Çelik yüz yüze kalınlığı | 0.50-1.50 mm compatible coated-steel frame or panel facing |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1300-1550 kg/m³ uncured sealant density |
| Termal İletkenlik | Approximately 0.20-0.30 W/(m·K) for cured silicone rubber |
| Yüzey bitirme | Smooth tooled silicone surface in translucent, white, gray or black |
| Ortak tip | Two-sided glazing, butt or perimeter joint over non-adhering backing material |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Translucent, white, gray or blackLow-modulus weatherseal gradeCompatible glazing primer300 mL cartridge or 600 mL foil pack
Planning a Neutral Silicone Sealant specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
