Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Accessoires d'installation Cleanroom
Z Silicone neutre Sealant
A non-corrosive neutral-cure silicone for elastic sealing around cleanroom glazing, coated-metal frames and non-porous perimeter joints.
- Neutral Non-Corrosive Cure
- Glazing-Compatible Adhesion
- UV and Ozone Resistance
- Flexible Temperature Service
Introduction de produit
Neutral silicone sealant cures through atmospheric moisture without releasing the acidic by-products associated with acetoxy silicone. The formulation is suited to glass, anodized aluminum, coated steel and many common frame materials used around cleanroom windows and doors. After cure, the silicone rubber retains flexibility across temperature cycling and resists UV and ozone exposure at perimeter interfaces.
Key Features
Low-modulus silicone movement accommodates glazing and frame perimeter expansion.
Cured silicone maintains flexibility through wide routine temperature variation.
Resistance to ultraviolet light, ozone and moisture supports exposed perimeter joints.
Préoccupations du client produit
Sensitive frame and glazing assemblies need an elastic seal that cures without attacking adjacent metals or coatings.
Acidic cure by-products can discolor or corrode susceptible metal interfaces.Neutral moisture curing avoids acetic-acid release and is selected for compatible glazing and frame substrates.
Glass and aluminum expand at different rates and tear rigid perimeter fillers.Low-modulus silicone sustains repeated movement while maintaining a continuous seal.
Sunlight and ozone embrittle unsuitable organic sealants at exterior frames.The silicone network provides durable resistance to UV radiation, ozone and weather exposure.
Contaminated joint flanks cause localized adhesion loss.Defined cleaning, masking and primer selection produce consistent two-sided adhesion.
Les applications typiques
Cleanroom observation-window perimetersAluminum door-frame jointsGlass-to-metal glazing sealsCoated-panel perimeter jointsInterior and exterior frame weather seals
Paramètres techniques
Typical construction and application ranges for a one-part neutral-cure silicone glazing sealant are shown below.
| Matériaux de base | One-component alkoxy neutral-cure silicone elastomer |
|---|---|
| Panneau épaisseur | 3-15 mm recommended cured seal depth |
| Largeur effective | 6-25 mm typical glazing or perimeter joint width |
| Longueur maximale | Up to 10000 mm continuous prepared perimeter section |
| Acier face épaisseur | 0.50-1.50 mm compatible coated-steel frame or panel facing |
| Densité Core | Approximately 1300-1550 kg/m³ uncured sealant density |
| Conductivité thermique | Approximately 0.20-0.30 W/(m·K) for cured silicone rubber |
| surface finie | Smooth tooled silicone surface in translucent, white, gray or black |
| Type joint | Two-sided glazing, butt or perimeter joint over non-adhering backing material |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Translucent, white, gray or blackLow-modulus weatherseal gradeCompatible glazing primer300 mL cartridge or 600 mL foil pack
Planning a Neutral Silicone Sealant specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
