Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Cleanroom Installation Zubehör
Neutraler Silicone Sealant
A non-corrosive neutral-cure silicone for elastic sealing around cleanroom glazing, coated-metal frames and non-porous perimeter joints.
- Neutral Non-Corrosive Cure
- Glazing-Compatible Adhesion
- UV and Ozone Resistance
- Flexible Temperature Service
Produkteinführung
Neutral silicone sealant cures through atmospheric moisture without releasing the acidic by-products associated with acetoxy silicone. The formulation is suited to glass, anodized aluminum, coated steel and many common frame materials used around cleanroom windows and doors. After cure, the silicone rubber retains flexibility across temperature cycling and resists UV and ozone exposure at perimeter interfaces.
Key Features
Low-modulus silicone movement accommodates glazing and frame perimeter expansion.
Cured silicone maintains flexibility through wide routine temperature variation.
Resistance to ultraviolet light, ozone and moisture supports exposed perimeter joints.
Kunden Produktbedenken
Sensitive frame and glazing assemblies need an elastic seal that cures without attacking adjacent metals or coatings.
Acidic cure by-products can discolor or corrode susceptible metal interfaces.Neutral moisture curing avoids acetic-acid release and is selected for compatible glazing and frame substrates.
Glass and aluminum expand at different rates and tear rigid perimeter fillers.Low-modulus silicone sustains repeated movement while maintaining a continuous seal.
Sunlight and ozone embrittle unsuitable organic sealants at exterior frames.The silicone network provides durable resistance to UV radiation, ozone and weather exposure.
Contaminated joint flanks cause localized adhesion loss.Defined cleaning, masking and primer selection produce consistent two-sided adhesion.
Typische Anwendungen
Cleanroom observation-window perimetersAluminum door-frame jointsGlass-to-metal glazing sealsCoated-panel perimeter jointsInterior and exterior frame weather seals
Technische Parameter
Typical construction and application ranges for a one-part neutral-cure silicone glazing sealant are shown below.
| Core Material | One-component alkoxy neutral-cure silicone elastomer |
|---|---|
| Panel Dicke | 3-15 mm recommended cured seal depth |
| Effektive Breite | 6-25 mm typical glazing or perimeter joint width |
| Maximale Länge | Up to 10000 mm continuous prepared perimeter section |
| Stahl facing Dicke | 0.50-1.50 mm compatible coated-steel frame or panel facing |
| Kerndichte | Approximately 1300-1550 kg/m³ uncured sealant density |
| Thermische Leitfähigkeit | Approximately 0.20-0.30 W/(m·K) for cured silicone rubber |
| Oberfläche Finish | Smooth tooled silicone surface in translucent, white, gray or black |
| Gemeinsamer Typ | Two-sided glazing, butt or perimeter joint over non-adhering backing material |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Translucent, white, gray or blackLow-modulus weatherseal gradeCompatible glazing primer300 mL cartridge or 600 mL foil pack
Planning a Neutral Silicone Sealant specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
