Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Duche de ar de sala limpa multi-pessoas
A modular personnel air shower that uses repeated fan, filtration and nozzle bays to clean a group during each controlled entry cycle.
- Group Entry Capacity
- Modular Airflow Bays
- Zoned Particle Returns
- Wide Access Layout
Introdução do produto
The multi-person air shower is assembled from scalable enclosure bays to create a wider cleaning area for groups. Each bay contributes filtered airflow and nozzle coverage, while zoned returns prevent contamination from travelling the full chamber length before collection. It can be arranged as a batch entry chamber for shift changes or as a short walk-through route when personnel flow requires it.
Características-chave
Nozzle zones can cover both outer and central standing positions.
Segmented returns reduce long contaminated-air paths.
A robust modular frame supports wider group-access openings.
Bay-by-bay service access allows staged maintenance.
Preocupações do produto do cliente
Group cleaning brings higher traffic and dust load, so air distribution and movement control are fundamental to the enclosure design.
Central occupants receive less direct cleaning air than those at the walls.Multiple sidewall zones and optional ceiling outlets extend coverage toward the centre.
Long common ductwork produces weak jets at the far end.Repeated pressure modules keep each nozzle zone close to its air source.
Crowded shift traffic interrupts the intended cleaning sequence.Wide access, occupancy indication and programmed interlocks organise each batch.
Large dust loads clog one small prefilter quickly.Zoned return paths distribute collection across several serviceable prefilters.
Aplicações típicas
Large pharmaceutical gowning roomsSemiconductor shift entrancesDisplay-panel productionAerospace controlled assembly
Parâmetros técnicos
Representative construction values for a modular group air shower follow.
| Material principal | Modular insulated steel shell with repeated blower-HEPA bays, multi-level stainless nozzles and zoned prefilter returns |
|---|---|
| Painel de espessura | 50-75 mm reinforced insulated wall modules |
| Largura efetiva | 1200-1800 mm clear group passage width |
| Comprimento máximo | Up to 3000 mm multi-person chamber length |
| Aço enfrentando espessura | 1.2-1.5 mm formed steel skins at high-traffic wall and door sections |
| Densidade Core | 60-90 kg/m³ mineral-wool or composite insulation infill |
| Condutividade térmica | 0.032-0.043 W/(m·K) depending on the selected enclosure core |
| Superfície acabado | Durable light-colour powder coating with brushed stainless wear surfaces |
| Tipo conjunto | Bolted modular bay joints with sealed internal cover strips and interlocked wide-door assemblies |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Four- to six-person layoutsBatch or walk-through logicAdditional ceiling nozzlesDouble-leaf or sliding doors
Planning a Multi-Person Cleanroom Air Shower specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
