Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Ducha de aire de sala limpia multipersona
A modular personnel air shower that uses repeated fan, filtration and nozzle bays to clean a group during each controlled entry cycle.
- Group Entry Capacity
- Modular Airflow Bays
- Zoned Particle Returns
- Wide Access Layout
Introducción del producto
The multi-person air shower is assembled from scalable enclosure bays to create a wider cleaning area for groups. Each bay contributes filtered airflow and nozzle coverage, while zoned returns prevent contamination from travelling the full chamber length before collection. It can be arranged as a batch entry chamber for shift changes or as a short walk-through route when personnel flow requires it.
Características clave
Nozzle zones can cover both outer and central standing positions.
Segmented returns reduce long contaminated-air paths.
A robust modular frame supports wider group-access openings.
Bay-by-bay service access allows staged maintenance.
Preocupaciones del producto del cliente
Group cleaning brings higher traffic and dust load, so air distribution and movement control are fundamental to the enclosure design.
Central occupants receive less direct cleaning air than those at the walls.Multiple sidewall zones and optional ceiling outlets extend coverage toward the centre.
Long common ductwork produces weak jets at the far end.Repeated pressure modules keep each nozzle zone close to its air source.
Crowded shift traffic interrupts the intended cleaning sequence.Wide access, occupancy indication and programmed interlocks organise each batch.
Large dust loads clog one small prefilter quickly.Zoned return paths distribute collection across several serviceable prefilters.
Aplicaciones típicas
Large pharmaceutical gowning roomsSemiconductor shift entrancesDisplay-panel productionAerospace controlled assembly
Parámetros técnicos
Representative construction values for a modular group air shower follow.
| Materiales Core | Modular insulated steel shell with repeated blower-HEPA bays, multi-level stainless nozzles and zoned prefilter returns |
|---|---|
| Panel de espesor | 50-75 mm reinforced insulated wall modules |
| Ancho efectivo | 1200-1800 mm clear group passage width |
| Longitud máxima | Up to 3000 mm multi-person chamber length |
| Acero frente a espesor | 1.2-1.5 mm formed steel skins at high-traffic wall and door sections |
| Densidad Core | 60-90 kg/m³ mineral-wool or composite insulation infill |
| Conductividad térmica | 0.032-0.043 W/(m·K) depending on the selected enclosure core |
| Superficie acabada | Durable light-colour powder coating with brushed stainless wear surfaces |
| Tipo conjunto | Bolted modular bay joints with sealed internal cover strips and interlocked wide-door assemblies |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Four- to six-person layoutsBatch or walk-through logicAdditional ceiling nozzlesDouble-leaf or sliding doors
Planning a Multi-Person Cleanroom Air Shower specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
