Pembekal Satu Henti Anda untuk Peralatan Bilik Bersih dan Kemudahan AseptikSokongan Projek Antarabangsa
Open mobile navigationClose mobile navigation
Laman Utama / Produk / Peralatan Dekontaminasi Kakitangan dan Bahan / Multi-Person Cleanroom Air Shower
Peralatan Dekontaminasi Kakitangan dan Bahan

Multi-Person Cleanroom Air Shower

A modular personnel air shower that uses repeated fan, filtration and nozzle bays to clean a group during each controlled entry cycle.
  • Group Entry Capacity
  • Modular Airflow Bays
  • Zoned Particle Returns
  • Wide Access Layout
Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The multi-person air shower is assembled from scalable enclosure bays to create a wider cleaning area for groups. Each bay contributes filtered airflow and nozzle coverage, while zoned returns prevent contamination from travelling the full chamber length before collection. It can be arranged as a batch entry chamber for shift changes or as a short walk-through route when personnel flow requires it.

Ciri-ciri Utama

Repeated fan-filter bays increase capacity with the length of the chamber.

Nozzle zones can cover both outer and central standing positions.

Segmented returns reduce long contaminated-air paths.

A robust modular frame supports wider group-access openings.

Bay-by-bay service access allows staged maintenance.

Kebimbangan Produk Pelanggan

Group cleaning brings higher traffic and dust load, so air distribution and movement control are fundamental to the enclosure design.

Central occupants receive less direct cleaning air than those at the walls.Multiple sidewall zones and optional ceiling outlets extend coverage toward the centre.
Long common ductwork produces weak jets at the far end.Repeated pressure modules keep each nozzle zone close to its air source.
Crowded shift traffic interrupts the intended cleaning sequence.Wide access, occupancy indication and programmed interlocks organise each batch.
Large dust loads clog one small prefilter quickly.Zoned return paths distribute collection across several serviceable prefilters.

Permohonan yang biasa

Large pharmaceutical gowning roomsSemiconductor shift entrancesDisplay-panel productionAerospace controlled assembly

Parameter teknikal

Representative construction values for a modular group air shower follow.

Bahan TerasModular insulated steel shell with repeated blower-HEPA bays, multi-level stainless nozzles and zoned prefilter returns
Ketebalan Panel50-75 mm reinforced insulated wall modules
Lebar berkesan1200-1800 mm clear group passage width
Panjang maksimumUp to 3000 mm multi-person chamber length
Keluli Menghadapi Ketebalan1.2-1.5 mm formed steel skins at high-traffic wall and door sections
Ketumpatan teras60-90 kg/m³ mineral-wool or composite insulation infill
Kekonduksian Terma0.032-0.043 W/(m·K) depending on the selected enclosure core
Kemasan permukaanDurable light-colour powder coating with brushed stainless wear surfaces
Jenis BersatuBolted modular bay joints with sealed internal cover strips and interlocked wide-door assemblies
PenyesuaianBoleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Four- to six-person layoutsBatch or walk-through logicAdditional ceiling nozzlesDouble-leaf or sliding doors

Planning a Multi-Person Cleanroom Air Shower specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami
Email Kami WhatsApp WeChat

Laman Utama

Produk

Berita

Tentang Kami

Hubungi Kami