English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Персонал и оборудование для дезактивации материалов
Многоместный воздушный душ в чистой комнате
A modular personnel air shower that uses repeated fan, filtration and nozzle bays to clean a group during each controlled entry cycle.
- Group Entry Capacity
- Modular Airflow Bays
- Zoned Particle Returns
- Wide Access Layout
Введение продукции
The multi-person air shower is assembled from scalable enclosure bays to create a wider cleaning area for groups. Each bay contributes filtered airflow and nozzle coverage, while zoned returns prevent contamination from travelling the full chamber length before collection. It can be arranged as a batch entry chamber for shift changes or as a short walk-through route when personnel flow requires it.
Основные характеристики
Nozzle zones can cover both outer and central standing positions.
Segmented returns reduce long contaminated-air paths.
A robust modular frame supports wider group-access openings.
Bay-by-bay service access allows staged maintenance.
Обеспокоенность клиентов продуктами
Group cleaning brings higher traffic and dust load, so air distribution and movement control are fundamental to the enclosure design.
Central occupants receive less direct cleaning air than those at the walls.Multiple sidewall zones and optional ceiling outlets extend coverage toward the centre.
Long common ductwork produces weak jets at the far end.Repeated pressure modules keep each nozzle zone close to its air source.
Crowded shift traffic interrupts the intended cleaning sequence.Wide access, occupancy indication and programmed interlocks organise each batch.
Large dust loads clog one small prefilter quickly.Zoned return paths distribute collection across several serviceable prefilters.
Типичные приложения
Large pharmaceutical gowning roomsSemiconductor shift entrancesDisplay-panel productionAerospace controlled assembly
Технические параметры
Representative construction values for a modular group air shower follow.
| Основной материал | Modular insulated steel shell with repeated blower-HEPA bays, multi-level stainless nozzles and zoned prefilter returns |
|---|---|
| Толщина панели | 50-75 mm reinforced insulated wall modules |
| эффективная ширина | 1200-1800 mm clear group passage width |
| Максимальная длина | Up to 3000 mm multi-person chamber length |
| Толщина линий стали | 1.2-1.5 mm formed steel skins at high-traffic wall and door sections |
| Плотность ядра | 60-90 kg/m³ mineral-wool or composite insulation infill |
| Теплопроводимость | 0.032-0.043 W/(m·K) depending on the selected enclosure core |
| Поверхностная отделка | Durable light-colour powder coating with brushed stainless wear surfaces |
| Объединенный тип | Bolted modular bay joints with sealed internal cover strips and interlocked wide-door assemblies |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Four- to six-person layoutsBatch or walk-through logicAdditional ceiling nozzlesDouble-leaf or sliding doors
Planning a Multi-Person Cleanroom Air Shower specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
