Large multi-person cleanroom air shower shown in complete three-quarter view

인력 및 재료 오염 제거 장비

클린룸 공기 샤워기

A modular personnel air shower that uses repeated fan, filtration and nozzle bays to clean a group during each controlled entry cycle.

Group Entry Capacity
Modular Airflow Bays
Zoned Particle Returns
Wide Access Layout

견적 요청 제품 찾아보기

상품 소개

The multi-person air shower is assembled from scalable enclosure bays to create a wider cleaning area for groups. Each bay contributes filtered airflow and nozzle coverage, while zoned returns prevent contamination from travelling the full chamber length before collection. It can be arranged as a batch entry chamber for shift changes or as a short walk-through route when personnel flow requires it.

주요 기능

Repeated fan-filter bays increase capacity with the length of the chamber.

Nozzle zones can cover both outer and central standing positions.

Segmented returns reduce long contaminated-air paths.

A robust modular frame supports wider group-access openings.

Bay-by-bay service access allows staged maintenance.

고객 제품 관심사

Group cleaning brings higher traffic and dust load, so air distribution and movement control are fundamental to the enclosure design.

Central occupants receive less direct cleaning air than those at the walls.Multiple sidewall zones and optional ceiling outlets extend coverage toward the centre.

Long common ductwork produces weak jets at the far end.Repeated pressure modules keep each nozzle zone close to its air source.

Crowded shift traffic interrupts the intended cleaning sequence.Wide access, occupancy indication and programmed interlocks organise each batch.

Large dust loads clog one small prefilter quickly.Zoned return paths distribute collection across several serviceable prefilters.

일반적인 응용 프로그램

Large pharmaceutical gowning roomsSemiconductor shift entrancesDisplay-panel productionAerospace controlled assembly

기술 매개변수

Representative construction values for a modular group air shower follow.

핵심 재료	Modular insulated steel shell with repeated blower-HEPA bays, multi-level stainless nozzles and zoned prefilter returns
패널 두께	50-75 mm reinforced insulated wall modules
유효 폭	1200-1800 mm clear group passage width
최대 길이	Up to 3000 mm multi-person chamber length
강철 면면 두께	1.2-1.5 mm formed steel skins at high-traffic wall and door sections
코어 밀도	60-90 kg/m³ mineral-wool or composite insulation infill
열전도도 (Thermal Conductivity)	0.032-0.043 W/(m·K) depending on the selected enclosure core
표면 마무리	Durable light-colour powder coating with brushed stainless wear surfaces
접합 유형	Bolted modular bay joints with sealed internal cover strips and interlocked wide-door assemblies
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Four- to six-person layoutsBatch or walk-through logicAdditional ceiling nozzlesDouble-leaf or sliding doors

Planning a Multi-Person Cleanroom Air Shower specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.