Large multi-person cleanroom air shower shown in complete three-quarter view

人員 · 材料の汚染除去設備

多人クリーンルーム空気シャワー

A modular personnel air shower that uses repeated fan, filtration and nozzle bays to clean a group during each controlled entry cycle.

Group Entry Capacity
Modular Airflow Bays
Zoned Particle Returns
Wide Access Layout

見積もりリクエスト製品案内

商品紹介

The multi-person air shower is assembled from scalable enclosure bays to create a wider cleaning area for groups. Each bay contributes filtered airflow and nozzle coverage, while zoned returns prevent contamination from travelling the full chamber length before collection. It can be arranged as a batch entry chamber for shift changes or as a short walk-through route when personnel flow requires it.

主要な特徴

Repeated fan-filter bays increase capacity with the length of the chamber.

Nozzle zones can cover both outer and central standing positions.

Segmented returns reduce long contaminated-air paths.

A robust modular frame supports wider group-access openings.

Bay-by-bay service access allows staged maintenance.

お客様の製品に関する懸念事項

Group cleaning brings higher traffic and dust load, so air distribution and movement control are fundamental to the enclosure design.

Central occupants receive less direct cleaning air than those at the walls.Multiple sidewall zones and optional ceiling outlets extend coverage toward the centre.

Long common ductwork produces weak jets at the far end.Repeated pressure modules keep each nozzle zone close to its air source.

Crowded shift traffic interrupts the intended cleaning sequence.Wide access, occupancy indication and programmed interlocks organise each batch.

Large dust loads clog one small prefilter quickly.Zoned return paths distribute collection across several serviceable prefilters.

典型的な用途

Large pharmaceutical gowning roomsSemiconductor shift entrancesDisplay-panel productionAerospace controlled assembly

技術的なパラメータ

Representative construction values for a modular group air shower follow.

コア材料	Modular insulated steel shell with repeated blower-HEPA bays, multi-level stainless nozzles and zoned prefilter returns
パネルの厚さ	50-75 mm reinforced insulated wall modules
有効幅	1200-1800 mm clear group passage width
最大長さ	Up to 3000 mm multi-person chamber length
鋼鉄の厚さを直面する	1.2-1.5 mm formed steel skins at high-traffic wall and door sections
コア密度	60-90 kg/m³ mineral-wool or composite insulation infill
熱伝導率	0.032-0.043 W/(m·K) depending on the selected enclosure core
表面仕上げ	Durable light-colour powder coating with brushed stainless wear surfaces
ジョイントタイプ	Bolted modular bay joints with sealed internal cover strips and interlocked wide-door assemblies
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Four- to six-person layoutsBatch or walk-through logicAdditional ceiling nozzlesDouble-leaf or sliding doors

Planning a Multi-Person Cleanroom Air Shower specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する