English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
شاش الهواء الغرف النظيفة متعدد الأشخاص
A modular personnel air shower that uses repeated fan, filtration and nozzle bays to clean a group during each controlled entry cycle.
- Group Entry Capacity
- Modular Airflow Bays
- Zoned Particle Returns
- Wide Access Layout
مقدمة المنتج
The multi-person air shower is assembled from scalable enclosure bays to create a wider cleaning area for groups. Each bay contributes filtered airflow and nozzle coverage, while zoned returns prevent contamination from travelling the full chamber length before collection. It can be arranged as a batch entry chamber for shift changes or as a short walk-through route when personnel flow requires it.
الخصائص الرئيسية
Nozzle zones can cover both outer and central standing positions.
Segmented returns reduce long contaminated-air paths.
A robust modular frame supports wider group-access openings.
Bay-by-bay service access allows staged maintenance.
مخاوف المنتج للعملاء
Group cleaning brings higher traffic and dust load, so air distribution and movement control are fundamental to the enclosure design.
Central occupants receive less direct cleaning air than those at the walls.Multiple sidewall zones and optional ceiling outlets extend coverage toward the centre.
Long common ductwork produces weak jets at the far end.Repeated pressure modules keep each nozzle zone close to its air source.
Crowded shift traffic interrupts the intended cleaning sequence.Wide access, occupancy indication and programmed interlocks organise each batch.
Large dust loads clog one small prefilter quickly.Zoned return paths distribute collection across several serviceable prefilters.
تطبيقات نموذجية
Large pharmaceutical gowning roomsSemiconductor shift entrancesDisplay-panel productionAerospace controlled assembly
المعلمات الفنية
Representative construction values for a modular group air shower follow.
| المواد الأساسية | Modular insulated steel shell with repeated blower-HEPA bays, multi-level stainless nozzles and zoned prefilter returns |
|---|---|
| سمك اللوحة | 50-75 mm reinforced insulated wall modules |
| العرض الفعال | 1200-1800 mm clear group passage width |
| الحد الأقصى الطول | Up to 3000 mm multi-person chamber length |
| الصلب يواجه سمك | 1.2-1.5 mm formed steel skins at high-traffic wall and door sections |
| الكثافة الأساسية | 60-90 kg/m³ mineral-wool or composite insulation infill |
| الموصلية الحرارية | 0.032-0.043 W/(m·K) depending on the selected enclosure core |
| إنهاء السطح | Durable light-colour powder coating with brushed stainless wear surfaces |
| نوع المشترك | Bolted modular bay joints with sealed internal cover strips and interlocked wide-door assemblies |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Four- to six-person layoutsBatch or walk-through logicAdditional ceiling nozzlesDouble-leaf or sliding doors
Planning a Multi-Person Cleanroom Air Shower specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
