Complete modular sampling room with separate personnel and material doors

Aliran Laminar dan Peralatan Pengekangan

Bilik Persampelan Modular

A panel-built sampling suite that separates incoming containers, personnel access and controlled sampling work within a self-contained warehouse installation.

Panel-Built Sampling Suite
Separated Material Access
Integrated Airflow Zones
Expandable Modular Layout

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The modular sampling room encloses a complete workflow rather than a single open booth. Insulated cleanroom panels form the sampling space, while personnel and material doors can be arranged to avoid crossing routes. A filtered supply and return system maintains the selected room pressure and can include a local downflow station over the active sampling table. The panel system allows future extension or relocation without masonry construction.

Ciri-ciri Utama

Separate personnel and material doors organize the sampling route.

A local downflow zone can be integrated within the larger clean room.

Flush wall and ceiling joints create cleanable internal surfaces.

Service panels group electrical, airflow and monitoring connections outside the work area.

Modular wall bays permit controlled expansion as sampling capacity grows.

Kebimbangan Produk Pelanggan

A full sampling workflow needs orderly movement of people and containers, not just localized dust capture at one table.

Personnel and raw-material routes cross at one doorway.Dedicated doors separate gowning access from container entry.

Only the active sampling point requires strong local capture.A downflow work zone is integrated inside the larger controlled room.

Warehouse construction changes interrupt operations.Prefabricated panels install with limited wet building work.

Future capacity requires another sampling bay.Modular wall and ceiling sections can extend the suite layout.

Permohonan yang biasa

Incoming pharmaceutical materialsFood-ingredient samplingCosmetic raw-material checksControlled warehouse quality sampling

Parameter teknikal

Typical configurable construction ranges for a modular raw-material sampling room are listed below.

Bahan Teras	Mineral-wool or polyurethane cleanroom panels with powder-coated steel faces and SUS304 internal work-zone liners
Ketebalan Panel	50-100 mm wall and ceiling panels
Lebar berkesan	2500-6000 mm clear room width
Panjang maksimum	Up to 12000 mm modular room length
Keluli Menghadapi Ketebalan	0.6-1.0 mm coated panel faces; 1.0-1.2 mm SUS304 local liners
Ketumpatan teras	80-120 kg/m³ mineral wool or 38-45 kg/m³ polyurethane
Kekonduksian Terma	0.035-0.045 W/(m·K) mineral wool or 0.022-0.028 W/(m·K) polyurethane
Kemasan permukaan	Low-sheen white cleanroom coating with brushed stainless work-zone surfaces
Jenis Bersatu	Flush sealed tongue-and-groove panels with coved internal bases and gasketed access doors
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Personnel and material airlocksIntegrated downflow boothPass-through sample hatchPressure display and room controls

Planning a Modular Sampling Room specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami