Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Équipement d'écoulement et de confinement laminaires
Salle d'échantillonnage modulaire
A panel-built sampling suite that separates incoming containers, personnel access and controlled sampling work within a self-contained warehouse installation.
- Panel-Built Sampling Suite
- Separated Material Access
- Integrated Airflow Zones
- Expandable Modular Layout
Introduction de produit
The modular sampling room encloses a complete workflow rather than a single open booth. Insulated cleanroom panels form the sampling space, while personnel and material doors can be arranged to avoid crossing routes. A filtered supply and return system maintains the selected room pressure and can include a local downflow station over the active sampling table. The panel system allows future extension or relocation without masonry construction.
Key Features
A local downflow zone can be integrated within the larger clean room.
Flush wall and ceiling joints create cleanable internal surfaces.
Service panels group electrical, airflow and monitoring connections outside the work area.
Modular wall bays permit controlled expansion as sampling capacity grows.
Préoccupations du client produit
A full sampling workflow needs orderly movement of people and containers, not just localized dust capture at one table.
Personnel and raw-material routes cross at one doorway.Dedicated doors separate gowning access from container entry.
Only the active sampling point requires strong local capture.A downflow work zone is integrated inside the larger controlled room.
Warehouse construction changes interrupt operations.Prefabricated panels install with limited wet building work.
Future capacity requires another sampling bay.Modular wall and ceiling sections can extend the suite layout.
Les applications typiques
Incoming pharmaceutical materialsFood-ingredient samplingCosmetic raw-material checksControlled warehouse quality sampling
Paramètres techniques
Typical configurable construction ranges for a modular raw-material sampling room are listed below.
| Matériaux de base | Mineral-wool or polyurethane cleanroom panels with powder-coated steel faces and SUS304 internal work-zone liners |
|---|---|
| Panneau épaisseur | 50-100 mm wall and ceiling panels |
| Largeur effective | 2500-6000 mm clear room width |
| Longueur maximale | Up to 12000 mm modular room length |
| Acier face épaisseur | 0.6-1.0 mm coated panel faces; 1.0-1.2 mm SUS304 local liners |
| Densité Core | 80-120 kg/m³ mineral wool or 38-45 kg/m³ polyurethane |
| Conductivité thermique | 0.035-0.045 W/(m·K) mineral wool or 0.022-0.028 W/(m·K) polyurethane |
| surface finie | Low-sheen white cleanroom coating with brushed stainless work-zone surfaces |
| Type joint | Flush sealed tongue-and-groove panels with coved internal bases and gasketed access doors |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Personnel and material airlocksIntegrated downflow boothPass-through sample hatchPressure display and room controls
Planning a Modular Sampling Room specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
