Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Sistema de barreira de acesso restrito modular
A configurable barrier platform assembled from standard glazed, glove-access and service modules to fit new or existing aseptic equipment.
- Configurable Modular Bays
- New or Retrofit Installation
- Interchangeable Glove Panels
- Custom Machine Interfaces
Introdução do produto
This modular RABS platform focuses on adaptable enclosure construction rather than one fixed open or closed airflow arrangement. Standard stainless frame bays accept clear fixed panels, glove doors, service doors, return sections and equipment cut-outs. The layout can be configured as an open or more enclosed barrier according to the process and cleanroom. Replaceable modules make later changes possible without rebuilding the entire enclosure, while the final airflow and access strategy remain specific to the installation.
Características-chave
Fixed glazing, glove panels and service doors can exchange positions within the grid.
Custom lower interfaces connect to irregular machine frames and conveyors.
Sectioned construction supports phased installation around existing equipment.
The platform can support open or closed airflow arrangements selected for the process.
Preocupações do produto do cliente
Existing process lines rarely match a fixed barrier geometry, and intervention points may change as equipment is upgraded.
A one-piece barrier cannot enter the existing production room.Sectioned modules assemble around the installed equipment.
Glove ports do not align after a machine change.Interchangeable glove-panel bays can be relocated within the modular grid.
Irregular conveyor penetrations remain open.Custom lower skirts and flexible seals close each equipment interface.
Future expansion requires replacing the full enclosure.Additional frame bays extend the barrier while existing modules are retained.
Aplicações típicas
RABS retrofit projectsPilot filling linesFlexible aseptic production cellsBarrier upgrades around legacy equipment
Parâmetros técnicos
Typical configurable construction ranges for a modular restricted access barrier system are listed below.
| Material principal | SUS304 or SUS316L modular frame with laminated safety-glass panels and interchangeable CSM glove modules |
|---|---|
| Painel de espessura | 30-80 mm modular barrier and service sections |
| Largura efetiva | 1200-5000 mm protected equipment width |
| Comprimento máximo | Up to 30000 mm expandable barrier length |
| Aço enfrentando espessura | 1.2-2.0 mm stainless doors, skirts and utility panels |
| Densidade Core | Approximately 2500 kg/m³ for laminated safety-glass panels |
| Condutividade térmica | 0.8-1.0 W/(m·K) for laminated safety glass |
| Superfície acabado | Fine-brushed stainless modular frame with flush clear glazing |
| Tipo conjunto | Bolted gasketed frame bays with replaceable glove, door, glazing and equipment-interface modules |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Open or closed airflow arrangementFixed, glove or service-door modulesStainless machine skirtsIntegrated lighting and monitoring rails
Planning a Modular Restricted Access Barrier System specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
