Modular restricted access barrier system assembled around process equipment

層流 · 封じ込め装置

Modular 制限されたアクセス障壁システム

A configurable barrier platform assembled from standard glazed, glove-access and service modules to fit new or existing aseptic equipment.

Configurable Modular Bays
New or Retrofit Installation
Interchangeable Glove Panels
Custom Machine Interfaces

見積もりリクエスト製品案内

商品紹介

This modular RABS platform focuses on adaptable enclosure construction rather than one fixed open or closed airflow arrangement. Standard stainless frame bays accept clear fixed panels, glove doors, service doors, return sections and equipment cut-outs. The layout can be configured as an open or more enclosed barrier according to the process and cleanroom. Replaceable modules make later changes possible without rebuilding the entire enclosure, while the final airflow and access strategy remain specific to the installation.

主要な特徴

Repeating frame bays adapt to different line lengths and equipment elevations.

Fixed glazing, glove panels and service doors can exchange positions within the grid.

Custom lower interfaces connect to irregular machine frames and conveyors.

Sectioned construction supports phased installation around existing equipment.

The platform can support open or closed airflow arrangements selected for the process.

お客様の製品に関する懸念事項

Existing process lines rarely match a fixed barrier geometry, and intervention points may change as equipment is upgraded.

A one-piece barrier cannot enter the existing production room.Sectioned modules assemble around the installed equipment.

Glove ports do not align after a machine change.Interchangeable glove-panel bays can be relocated within the modular grid.

Irregular conveyor penetrations remain open.Custom lower skirts and flexible seals close each equipment interface.

Future expansion requires replacing the full enclosure.Additional frame bays extend the barrier while existing modules are retained.

典型的な用途

RABS retrofit projectsPilot filling linesFlexible aseptic production cellsBarrier upgrades around legacy equipment

技術的なパラメータ

Typical configurable construction ranges for a modular restricted access barrier system are listed below.

コア材料	SUS304 or SUS316L modular frame with laminated safety-glass panels and interchangeable CSM glove modules
パネルの厚さ	30-80 mm modular barrier and service sections
有効幅	1200-5000 mm protected equipment width
最大長さ	Up to 30000 mm expandable barrier length
鋼鉄の厚さを直面する	1.2-2.0 mm stainless doors, skirts and utility panels
コア密度	Approximately 2500 kg/m³ for laminated safety-glass panels
熱伝導率	0.8-1.0 W/(m·K) for laminated safety glass
表面仕上げ	Fine-brushed stainless modular frame with flush clear glazing
ジョイントタイプ	Bolted gasketed frame bays with replaceable glove, door, glazing and equipment-interface modules
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Open or closed airflow arrangementFixed, glove or service-door modulesStainless machine skirtsIntegrated lighting and monitoring rails

Planning a Modular Restricted Access Barrier System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する