Modular restricted access barrier system assembled around process equipment

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

모듈식 접근 제한 장벽 시스템

A configurable barrier platform assembled from standard glazed, glove-access and service modules to fit new or existing aseptic equipment.

Configurable Modular Bays
New or Retrofit Installation
Interchangeable Glove Panels
Custom Machine Interfaces

견적 요청 제품 찾아보기

상품 소개

This modular RABS platform focuses on adaptable enclosure construction rather than one fixed open or closed airflow arrangement. Standard stainless frame bays accept clear fixed panels, glove doors, service doors, return sections and equipment cut-outs. The layout can be configured as an open or more enclosed barrier according to the process and cleanroom. Replaceable modules make later changes possible without rebuilding the entire enclosure, while the final airflow and access strategy remain specific to the installation.

주요 기능

Repeating frame bays adapt to different line lengths and equipment elevations.

Fixed glazing, glove panels and service doors can exchange positions within the grid.

Custom lower interfaces connect to irregular machine frames and conveyors.

Sectioned construction supports phased installation around existing equipment.

The platform can support open or closed airflow arrangements selected for the process.

고객 제품 관심사

Existing process lines rarely match a fixed barrier geometry, and intervention points may change as equipment is upgraded.

A one-piece barrier cannot enter the existing production room.Sectioned modules assemble around the installed equipment.

Glove ports do not align after a machine change.Interchangeable glove-panel bays can be relocated within the modular grid.

Irregular conveyor penetrations remain open.Custom lower skirts and flexible seals close each equipment interface.

Future expansion requires replacing the full enclosure.Additional frame bays extend the barrier while existing modules are retained.

일반적인 응용 프로그램

RABS retrofit projectsPilot filling linesFlexible aseptic production cellsBarrier upgrades around legacy equipment

기술 매개변수

Typical configurable construction ranges for a modular restricted access barrier system are listed below.

핵심 재료	SUS304 or SUS316L modular frame with laminated safety-glass panels and interchangeable CSM glove modules
패널 두께	30-80 mm modular barrier and service sections
유효 폭	1200-5000 mm protected equipment width
최대 길이	Up to 30000 mm expandable barrier length
강철 면면 두께	1.2-2.0 mm stainless doors, skirts and utility panels
코어 밀도	Approximately 2500 kg/m³ for laminated safety-glass panels
열전도도 (Thermal Conductivity)	0.8-1.0 W/(m·K) for laminated safety glass
표면 마무리	Fine-brushed stainless modular frame with flush clear glazing
접합 유형	Bolted gasketed frame bays with replaceable glove, door, glazing and equipment-interface modules
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Open or closed airflow arrangementFixed, glove or service-door modulesStainless machine skirtsIntegrated lighting and monitoring rails

Planning a Modular Restricted Access Barrier System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.