English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
نظام حاجز الوصول المقيد الموحد
A configurable barrier platform assembled from standard glazed, glove-access and service modules to fit new or existing aseptic equipment.
- Configurable Modular Bays
- New or Retrofit Installation
- Interchangeable Glove Panels
- Custom Machine Interfaces
مقدمة المنتج
This modular RABS platform focuses on adaptable enclosure construction rather than one fixed open or closed airflow arrangement. Standard stainless frame bays accept clear fixed panels, glove doors, service doors, return sections and equipment cut-outs. The layout can be configured as an open or more enclosed barrier according to the process and cleanroom. Replaceable modules make later changes possible without rebuilding the entire enclosure, while the final airflow and access strategy remain specific to the installation.
الخصائص الرئيسية
Fixed glazing, glove panels and service doors can exchange positions within the grid.
Custom lower interfaces connect to irregular machine frames and conveyors.
Sectioned construction supports phased installation around existing equipment.
The platform can support open or closed airflow arrangements selected for the process.
مخاوف المنتج للعملاء
Existing process lines rarely match a fixed barrier geometry, and intervention points may change as equipment is upgraded.
A one-piece barrier cannot enter the existing production room.Sectioned modules assemble around the installed equipment.
Glove ports do not align after a machine change.Interchangeable glove-panel bays can be relocated within the modular grid.
Irregular conveyor penetrations remain open.Custom lower skirts and flexible seals close each equipment interface.
Future expansion requires replacing the full enclosure.Additional frame bays extend the barrier while existing modules are retained.
تطبيقات نموذجية
RABS retrofit projectsPilot filling linesFlexible aseptic production cellsBarrier upgrades around legacy equipment
المعلمات الفنية
Typical configurable construction ranges for a modular restricted access barrier system are listed below.
| المواد الأساسية | SUS304 or SUS316L modular frame with laminated safety-glass panels and interchangeable CSM glove modules |
|---|---|
| سمك اللوحة | 30-80 mm modular barrier and service sections |
| العرض الفعال | 1200-5000 mm protected equipment width |
| الحد الأقصى الطول | Up to 30000 mm expandable barrier length |
| الصلب يواجه سمك | 1.2-2.0 mm stainless doors, skirts and utility panels |
| الكثافة الأساسية | Approximately 2500 kg/m³ for laminated safety-glass panels |
| الموصلية الحرارية | 0.8-1.0 W/(m·K) for laminated safety glass |
| إنهاء السطح | Fine-brushed stainless modular frame with flush clear glazing |
| نوع المشترك | Bolted gasketed frame bays with replaceable glove, door, glazing and equipment-interface modules |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Open or closed airflow arrangementFixed, glove or service-door modulesStainless machine skirtsIntegrated lighting and monitoring rails
Planning a Modular Restricted Access Barrier System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
