Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de descontaminação de pessoal e materiais
Limpiador de sola adesiva de baixo perfil com gabinete de extração remota
A low SUS304 adhesive-mat tray paired with an independent suction-and-filtration cabinet for dry contamination-control entry areas.
- Low-profile SUS304 mat tray
- Replaceable adhesive collection media
- Separate filtered extraction cabinet
- Remote service access
Introdução do produto
This two-part entry system keeps the walking surface and extraction service equipment separate. The low-profile SUS304 tray holds replaceable adhesive collection media at the approach point, while an independently located suction-and-filtration cabinet manages extracted dust from the designated collection zone. The layout suits dry controlled entries where the service cabinet should not occupy the personnel walking surface.
Características-chave
Replaceable adhesive sheets or film can be changed without moving the extraction cabinet.
The separate cabinet allows filter service away from the entry mat position.
A low threshold profile reduces the step-up at the personnel route.
The mat tray and cabinet can be positioned to suit the available entrance geometry.
Preocupações do produto do cliente
A dry entry may need adhesive collection at floor level while placing suction and filter servicing away from the walking line.
A raised dust-control unit disrupts a narrow personnel route.The SUS304 mat tray uses a low-profile format at the approach point.
Filter servicing beside the entry surface creates congestion.The suction-and-filtration cabinet is independent from the adhesive mat tray.
Adhesive media must be renewed without dismantling the complete entry system.The mat tray accepts replaceable adhesive media as a separate service item.
Dry areas cannot use a wet footwear-cleaning process.The system relies on dry adhesive collection and a separate extraction arrangement.
Aplicações típicas
Electronics cleanroom approachesDry pharmaceutical support entriesPrecision optics changing areasBattery dry-room access zonesLaboratory personnel routes
Parâmetros técnicos
The tray footprint, adhesive-media format and remote cabinet placement can be selected around the dry entry layout.
| Material principal | SUS304 adhesive mat tray with separate SUS304 filtered extraction cabinet |
|---|---|
| Painel de espessura | 1.0–1.5 mm stainless steel tray and cabinet panels |
| Largura efetiva | 450–800 mm active adhesive mat width |
| Comprimento máximo | 600–1200 mm low-profile mat length |
| Aço enfrentando espessura | 1.0–1.5 mm SUS304 |
| Densidade Core | 900–950 kg/m³ for adhesive-film polymer backing |
| Condutividade térmica | 0.35–0.45 W/(m·K) for adhesive-film polymer backing |
| Superfície acabado | Brushed SUS304 tray and cabinet with replaceable adhesive collection media |
| Tipo conjunto | Removable adhesive-media tray with independently ducted filter cabinet |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Adhesive sheet or film formatSingle or dual mat-tray layoutExtraction cabinet positionPre-filter and final-filter service stages
Planning a Low-Profile Adhesive Sole Cleaner with Remote Extraction Cabinet specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
