人員 · 材料の汚染除去設備

遠隔抽出キャビネットの低プロファイル接着性ソールクリーナー

A low SUS304 adhesive-mat tray paired with an independent suction-and-filtration cabinet for dry contamination-control entry areas.

Low-profile SUS304 mat tray
Replaceable adhesive collection media
Separate filtered extraction cabinet
Remote service access

見積もりリクエスト製品案内

商品紹介

This two-part entry system keeps the walking surface and extraction service equipment separate. The low-profile SUS304 tray holds replaceable adhesive collection media at the approach point, while an independently located suction-and-filtration cabinet manages extracted dust from the designated collection zone. The layout suits dry controlled entries where the service cabinet should not occupy the personnel walking surface.

主要な特徴

The low stainless steel tray gives adhesive collection media a defined, stable location.

Replaceable adhesive sheets or film can be changed without moving the extraction cabinet.

The separate cabinet allows filter service away from the entry mat position.

A low threshold profile reduces the step-up at the personnel route.

The mat tray and cabinet can be positioned to suit the available entrance geometry.

お客様の製品に関する懸念事項

A dry entry may need adhesive collection at floor level while placing suction and filter servicing away from the walking line.

A raised dust-control unit disrupts a narrow personnel route.The SUS304 mat tray uses a low-profile format at the approach point.

Filter servicing beside the entry surface creates congestion.The suction-and-filtration cabinet is independent from the adhesive mat tray.

Adhesive media must be renewed without dismantling the complete entry system.The mat tray accepts replaceable adhesive media as a separate service item.

Dry areas cannot use a wet footwear-cleaning process.The system relies on dry adhesive collection and a separate extraction arrangement.

典型的な用途

Electronics cleanroom approachesDry pharmaceutical support entriesPrecision optics changing areasBattery dry-room access zonesLaboratory personnel routes

技術的なパラメータ

The tray footprint, adhesive-media format and remote cabinet placement can be selected around the dry entry layout.

コア材料	SUS304 adhesive mat tray with separate SUS304 filtered extraction cabinet
パネルの厚さ	1.0–1.5 mm stainless steel tray and cabinet panels
有効幅	450–800 mm active adhesive mat width
最大長さ	600–1200 mm low-profile mat length
鋼鉄の厚さを直面する	1.0–1.5 mm SUS304
コア密度	900–950 kg/m³ for adhesive-film polymer backing
熱伝導率	0.35–0.45 W/(m·K) for adhesive-film polymer backing
表面仕上げ	Brushed SUS304 tray and cabinet with replaceable adhesive collection media
ジョイントタイプ	Removable adhesive-media tray with independently ducted filter cabinet
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Adhesive sheet or film formatSingle or dual mat-tray layoutExtraction cabinet positionPre-filter and final-filter service stages

Planning a Low-Profile Adhesive Sole Cleaner with Remote Extraction Cabinet specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する